NTSTATUS codes list

List of NTSTATUS codes

An NTSTATUS code is an error code used in Windows NT, Windows XP, Windows Vista, Windows, and Windows 8 to communicate error results throughout the operating system. Device driver developers use NTSTATUS codes both when they make calls into Windows APIs as well as when driver devleopers return error codes to Windows.

Below is a comprehensive list of NTSTATUS codes defined in ntstatus.h

Status
Value
Description
STATUS_WAIT_00x0STATUS_SUCCESS
STATUS_SUCCESS0x0STATUS_SUCCESS
STATUS_WAIT_10x1STATUS_WAIT_1
STATUS_WAIT_20x2STATUS_WAIT_2
STATUS_WAIT_30x3STATUS_WAIT_3
STATUS_WAIT_630x3FSTATUS_WAIT_63
STATUS_ABANDONED0x80STATUS_ABANDONED_WAIT_0
STATUS_ABANDONED_WAIT_00x80STATUS_ABANDONED_WAIT_0
STATUS_ABANDONED_WAIT_630xBFSTATUS_ABANDONED_WAIT_63
STATUS_USER_APC0xC0STATUS_USER_APC
STATUS_KERNEL_APC0x100STATUS_KERNEL_APC
STATUS_ALERTED0x101STATUS_ALERTED
STATUS_TIMEOUT0x102STATUS_TIMEOUT
STATUS_PENDING0x103The operation that was requested is pending completion.
STATUS_REPARSE0x104A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
STATUS_MORE_ENTRIES0x105Returned by enumeration APIs to indicate more information is available to successive calls.
STATUS_NOT_ALL_ASSIGNED0x106Indicates not all privileges or groups referenced are assigned to the caller. This allows, for example, all privileges to be disabled without having to know exactly which privileges are assigned.
STATUS_SOME_NOT_MAPPED0x107Some of the information to be translated has not been translated.
STATUS_OPLOCK_BREAK_IN_PROGRESS0x108An open/create operation completed while an oplock break is underway.
STATUS_VOLUME_MOUNTED0x109A new volume has been mounted by a file system.
STATUS_RXACT_COMMITTED0x10AThis success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed.
STATUS_NOTIFY_CLEANUP0x10BThis indicates that a notify change request has been completed due to closing the handle which made the notify change request.
STATUS_NOTIFY_ENUM_DIR0x10CThis indicates that a notify change request is being completed and that the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
STATUS_NO_QUOTAS_FOR_ACCOUNT0x10D{No Quotas} No system quota limits are specifically set for this account.
STATUS_PAGE_FAULT_TRANSITION0x110Page fault was a transition fault.
STATUS_PAGE_FAULT_DEMAND_ZERO0x111Page fault was a demand zero fault.
STATUS_PAGE_FAULT_COPY_ON_WRITE0x112Page fault was a demand zero fault.
STATUS_PAGE_FAULT_GUARD_PAGE0x113Page fault was a demand zero fault.
STATUS_PAGE_FAULT_PAGING_FILE0x114Page fault was satisfied by reading from a secondary storage device.
STATUS_CACHE_PAGE_LOCKED0x115Cached page was locked during operation.
STATUS_CRASH_DUMP0x116Crash dump exists in paging file.
STATUS_BUFFER_ALL_ZEROS0x117Specified buffer contains all zeros.
STATUS_REPARSE_OBJECT0x118A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
STATUS_TRANSLATION_COMPLETE0x120The translator has translated these resources into the global space and no further translations should be performed.
STATUS_NOTHING_TO_TERMINATE0x122A process being terminated has no threads to terminate.
STATUS_PROCESS_NOT_IN_JOB0x123The specified process is not part of a job.
STATUS_PROCESS_IN_JOB0x124The specified process is part of a job.
STATUS_VOLSNAP_HIBERNATE_READY0x125{Volume Shadow Copy Service} The system is now ready for hibernation.
STATUS_PROCESS_CLONED0x129The current process is a cloned process.
STATUS_FILE_LOCKED_WITH_WRITERS0x12BThe file was locked and at least one user of the file can write.
STATUS_VALID_IMAGE_HASH0x12CThe file image hash is valid.
STATUS_RING_PREVIOUSLY_EMPTY0x210The specified ring buffer was empty before the packet was successfully inserted.
STATUS_RING_PREVIOUSLY_FULL0x211The specified ring buffer was full before the packet was successfully removed.
STATUS_RING_NEWLY_EMPTY0x213The specified ring buffer has, with the removal of the current packet, now become empty.
STATUS_OPLOCK_HANDLE_CLOSED0x216The handle with which this oplock was associated has been closed. The oplock is now broken.
STATUS_WAIT_FOR_OPLOCK0x367An operation is blocked waiting for an oplock.
DBG_EXCEPTION_HANDLED0x10001Debugger handled exception
DBG_CONTINUE0x10002Debugger continued
STATUS_FLT_IO_COMPLETE0x1C0001The IO was completed by a filter.
STATUS_DIS_ATTRIBUTE_BUILT0x3C0001An attribute was successfully built.
STATUS_OBJECT_NAME_EXISTS0x40000000{Object Exists} An attempt was made to create an object and the object name already existed.
STATUS_THREAD_WAS_SUSPENDED0x40000001{Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.
STATUS_WORKING_SET_LIMIT_RANGE0x40000002{Working Set Range Error} An attempt was made to set the working set minimum or maximum to values which are outside of the allowable range.
STATUS_IMAGE_NOT_AT_BASE0x40000003{Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.
STATUS_RXACT_STATE_CREATED0x40000004This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.
STATUS_SEGMENT_NOTIFICATION0x40000005{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.
STATUS_LOCAL_USER_SESSION_KEY0x40000006{Local Session Key} A user session key was requested for a local RPC connection. The session key returned is a constant value and not unique to this connection.
STATUS_BAD_CURRENT_DIRECTORY0x40000007{Invalid Current Directory} The process cannot switch to the startup current directory hs. Select OK to set current directory to hs, or select CANCEL to exit.
STATUS_SERIAL_MORE_WRITES0x40000008{Serial IOCTL Complete} A serial I/O operation was completed by another write to a serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
STATUS_REGISTRY_RECOVERED0x40000009{Registry Recovery} One of the files containing the system's Registry data had to be recovered by use of a log or alternate copy. The recovery was successful.
STATUS_FT_WRITE_RECOVERY0x4000000B{Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.
STATUS_SERIAL_COUNTER_TIMEOUT0x4000000C{Serial IOCTL Timeout} A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER had not reached zero.)
STATUS_NULL_LM_PASSWORD0x4000000D{Password Too Complex} The Windows password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
STATUS_RECEIVE_PARTIAL0x4000000F{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.
STATUS_RECEIVE_EXPEDITED0x40000010{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.
STATUS_EVENT_DONE0x40000012{TDI Event Done} The TDI indication has completed successfully.
STATUS_EVENT_PENDING0x40000013{TDI Event Pending} The TDI indication has entered the pending state.
STATUS_CHECKING_FILE_SYSTEM0x40000014Checking file system on wZ
STATUS_FATAL_APP_EXIT0x40000015{Fatal Application Exit} hs
STATUS_PREDEFINED_HANDLE0x40000016The specified registry key is referenced by a predefined handle.
STATUS_WAS_UNLOCKED0x40000017{Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.
STATUS_SERVICE_NOTIFICATION0x40000018hs
STATUS_WAS_LOCKED0x40000019{Page Locked} One of the pages to lock was already locked.
STATUS_ALREADY_WIN320x4000001BSTATUS_ALREADY_WIN32
STATUS_WX86_UNSIMULATE0x4000001CException status code used by Win32 x86 emulation subsystem.
STATUS_WX86_CONTINUE0x4000001DException status code used by Win32 x86 emulation subsystem.
STATUS_WX86_SINGLE_STEP0x4000001EException status code used by Win32 x86 emulation subsystem.
STATUS_WX86_BREAKPOINT0x4000001FException status code used by Win32 x86 emulation subsystem.
STATUS_WX86_EXCEPTION_CONTINUE0x40000020Exception status code used by Win32 x86 emulation subsystem.
STATUS_WX86_EXCEPTION_CHAIN0x40000022Exception status code used by Win32 x86 emulation subsystem.
STATUS_NO_YIELD_PERFORMED0x40000024A yield execution was performed and no thread was available to run.
STATUS_TIMER_RESUME_IGNORED0x40000025The resumable flag to a timer API was ignored.
STATUS_ARBITRATION_UNHANDLED0x40000026The arbiter has deferred arbitration of these resources to its parent
STATUS_CARDBUS_NOT_SUPPORTED0x40000027The device "hs" has detected a CardBus card in its slot, but the firmware on this system is not configured to allow the CardBus controller to be run in CardBus mode. The operating system will currently accept only 16-bit (R2) pc-cards on this controller.
STATUS_WX86_CREATEWX86TIB0x40000028Exception status code used by Win32 x86 emulation subsystem.
STATUS_MP_PROCESSOR_MISMATCH0x40000029The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.
STATUS_HIBERNATED0x4000002AThe system was put into hibernation.
STATUS_RESUME_HIBERNATION0x4000002BThe system was resumed from hibernation.
STATUS_MESSAGE_RETRIEVED0x4000002EThe ALPC message being canceled has already been retrieved from the queue on the other side.
STATUS_ABANDON_HIBERFILE0x40000033A valid hibernation file has been invalidated and should be abandoned.
STATUS_BIZRULES_NOT_ENABLED0x40000034Business rule scripts are disabled for the calling application.
STATUS_FT_READ_FROM_COPY0x40000035The specified copy of the requested data was successfully read.
STATUS_IMAGE_AT_DIFFERENT_BASE0x40000036{Image Relocated} An image file was mapped at a different address from the one specified in the image file but fixups will still be automatically performed on the image.
DBG_REPLY_LATER0x40010001Debugger will reply later.
DBG_UNABLE_TO_PROVIDE_HANDLE0x40010002Debugger cannot provide handle.
DBG_TERMINATE_THREAD0x40010003Debugger terminated thread.
DBG_TERMINATE_PROCESS0x40010004Debugger terminated process.
DBG_CONTROL_C0x40010005Debugger got control C.
DBG_PRINTEXCEPTION_C0x40010006Debugger printed exception on control C.
DBG_RIPEXCEPTION0x40010007Debugger received RIP exception.
DBG_CONTROL_BREAK0x40010008Debugger received control break.
DBG_COMMAND_EXCEPTION0x40010009Debugger command communication exception.
STATUS_GUARD_PAGE_VIOLATION0x80000001{EXCEPTION} Guard Page Exception A page of memory that marks the end of a data structure, such as a stack or an array, has been accessed.
STATUS_DATATYPE_MISALIGNMENT0x80000002{EXCEPTION} Alignment Fault A datatype misalignment was detected in a load or store instruction.
STATUS_BREAKPOINT0x80000003{EXCEPTION} Breakpoint A breakpoint has been reached.
STATUS_SINGLE_STEP0x80000004{EXCEPTION} Single Step A single step or trace operation has just been completed.
STATUS_BUFFER_OVERFLOW0x80000005{Buffer Overflow} The data was too large to fit into the specified buffer.
STATUS_NO_MORE_FILES0x80000006{No More Files} No more files were found which match the file specification.
STATUS_WAKE_SYSTEM_DEBUGGER0x80000007{Kernel Debugger Awakened} the system debugger was awakened by an interrupt.
STATUS_HANDLES_CLOSED0x8000000A{Handles Closed} Handles to objects have been automatically closed as a result of the requested operation.
STATUS_NO_INHERITANCE0x8000000B{Non-Inheritable ACL} An access control list (ACL) contains no components that can be inherited.
STATUS_GUID_SUBSTITUTION_MADE0x8000000C{GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.
STATUS_PARTIAL_COPY0x8000000D{Partial Copy} Due to protection conflicts not all the requested bytes could be copied.
STATUS_DEVICE_PAPER_EMPTY0x8000000E{Out of Paper} The printer is out of paper.
STATUS_DEVICE_POWERED_OFF0x8000000F{Device Power Is Off} The printer power has been turned off.
STATUS_DEVICE_OFF_LINE0x80000010{Device Offline} The printer has been taken offline.
STATUS_DEVICE_BUSY0x80000011{Device Busy} The device is currently busy.
STATUS_NO_MORE_EAS0x80000012{No More EAs} No more extended attributes (EAs) were found for the file.
STATUS_INVALID_EA_NAME0x80000013{Illegal EA} The specified extended attribute (EA) name contains at least one illegal character.
STATUS_EA_LIST_INCONSISTENT0x80000014{Inconsistent EA List} The extended attribute (EA) list is inconsistent.
STATUS_INVALID_EA_FLAG0x80000015{Invalid EA Flag} An invalid extended attribute (EA) flag was set.
STATUS_VERIFY_REQUIRED0x80000016{Verifying Disk} The media has changed and a verify operation is in progress so no reads or writes may be performed to the device, except those used in the verify operation.
STATUS_EXTRANEOUS_INFORMATION0x80000017{Too Much Information} The specified access control list (ACL) contained more information than was expected.
STATUS_RXACT_COMMIT_NECESSARY0x80000018This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).
STATUS_NO_MORE_ENTRIES0x8000001A{No More Entries} No more entries are available from an enumeration operation.
STATUS_FILEMARK_DETECTED0x8000001B{Filemark Found} A filemark was detected.
STATUS_MEDIA_CHANGED0x8000001C{Media Changed} The media may have changed.
STATUS_BUS_RESET0x8000001D{I/O Bus Reset} An I/O bus reset was detected.
STATUS_END_OF_MEDIA0x8000001E{End of Media} The end of the media was encountered.
STATUS_BEGINNING_OF_MEDIA0x8000001FBeginning of tape or partition has been detected.
STATUS_MEDIA_CHECK0x80000020{Media Changed} The media may have changed.
STATUS_SETMARK_DETECTED0x80000021A tape access reached a setmark.
STATUS_NO_DATA_DETECTED0x80000022During a tape access, the end of the data written is reached.
STATUS_SERVER_HAS_OPEN_HANDLES0x80000024The server is in use and cannot be unloaded.
STATUS_ALREADY_DISCONNECTED0x80000025The specified connection has already been disconnected.
STATUS_LONGJUMP0x80000026A long jump has been executed.
STATUS_PLUGPLAY_QUERY_VETOED0x80000028The Plug and Play query operation was not successful.
STATUS_UNWIND_CONSOLIDATE0x80000029A frame consolidation has been executed.
STATUS_REGISTRY_HIVE_RECOVERED0x8000002A{Registry Hive Recovered} Registry hive (file): hs was corrupted and it has been recovered. Some data might have been lost.
STATUS_DLL_MIGHT_BE_INSECURE0x8000002BThe application is attempting to run executable code from the module hs. This may be insecure. An alternative, hs, is available. Should the application use the secure module hs?
STATUS_STOPPED_ON_SYMLINK0x8000002DThe create operation stopped after reaching a symbolic link.
STATUS_NO_ACE_CONDITION0x8000002F{No ACE Condition} The specified access control entry (ACE) does not contain a condition.
DBG_EXCEPTION_NOT_HANDLED0x80010001Debugger did not handle the exception.
STATUS_CLUSTER_NODE_ALREADY_UP0x80130001The cluster node is already up.
STATUS_FLT_BUFFER_TOO_SMALL0x801C0001{Buffer too small} The buffer is too small to contain the entry. No information has been written to the buffer.
STATUS_FVE_PARTIAL_METADATA0x80210001Volume Metadata read or write is incomplete.
STATUS_FVE_TRANSIENT_STATE0x80210002BitLocker encryption keys were ignored because the volume was in a transient state.
STATUS_UNSUCCESSFUL0xC0000001{Operation Failed} The requested operation was unsuccessful.
STATUS_NOT_IMPLEMENTED0xC0000002{Not Implemented} The requested operation is not implemented.
STATUS_INVALID_INFO_CLASS0xC0000003{Invalid Parameter} The specified information class is not a valid information class for the specified object.
STATUS_INFO_LENGTH_MISMATCH0xC0000004The specified information record length does not match the length required for the specified information class.
STATUS_ACCESS_VIOLATION0xC0000005The instruction at 0x
STATUS_IN_PAGE_ERROR0xC0000006The instruction at 0xp referenced memory at 0xp. The required data was not placed into memory because of an I/O error status of 0xx.
STATUS_PAGEFILE_QUOTA0xC0000007The pagefile quota for the process has been exhausted.
STATUS_INVALID_HANDLE0xC0000008An invalid HANDLE was specified.
STATUS_BAD_INITIAL_STACK0xC0000009An invalid initial stack was specified in a call to NtCreateThread.
STATUS_BAD_INITIAL_PC0xC000000AAn invalid initial start address was specified in a call to NtCreateThread.
STATUS_INVALID_CID0xC000000BAn invalid Client ID was specified.
STATUS_TIMER_NOT_CANCELED0xC000000CAn attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
STATUS_INVALID_PARAMETER0xC000000DAn invalid parameter was passed to a service or function.
STATUS_NO_SUCH_DEVICE0xC000000EA device which does not exist was specified.
STATUS_NO_SUCH_FILE0xC000000F{File Not Found} The file hs does not exist.
STATUS_INVALID_DEVICE_REQUEST0xC0000010The specified request is not a valid operation for the target device.
STATUS_END_OF_FILE0xC0000011The end-of-file marker has been reached. There is no valid data in the file beyond this marker.
STATUS_WRONG_VOLUME0xC0000012{Wrong Volume} The wrong volume is in the drive. Please insert volume hs into drive hs.
STATUS_NO_MEDIA_IN_DEVICE0xC0000013{No Disk} There is no disk in the drive. Please insert a disk into drive hs.
STATUS_UNRECOGNIZED_MEDIA0xC0000014{Unknown Disk Format} The disk in drive hs is not formatted properly. Please check the disk, and reformat if necessary.
STATUS_NONEXISTENT_SECTOR0xC0000015{Sector Not Found} The specified sector does not exist.
STATUS_MORE_PROCESSING_REQUIRED0xC0000016{Still Busy} The specified I/O request packet (IRP) cannot be disposed of because the I/O operation is not complete.
STATUS_NO_MEMORY0xC0000017{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
STATUS_CONFLICTING_ADDRESSES0xC0000018{Conflicting Address Range} The specified address range conflicts with the address space.
STATUS_NOT_MAPPED_VIEW0xC0000019Address range to unmap is not a mapped view.
STATUS_UNABLE_TO_FREE_VM0xC000001AVirtual memory cannot be freed.
STATUS_UNABLE_TO_DELETE_SECTION0xC000001BSpecified section cannot be deleted.
STATUS_INVALID_SYSTEM_SERVICE0xC000001CAn invalid system service was specified in a system service call.
STATUS_ILLEGAL_INSTRUCTION0xC000001D{EXCEPTION} Illegal Instruction An attempt was made to execute an illegal instruction.
STATUS_INVALID_LOCK_SEQUENCE0xC000001E{Invalid Lock Sequence} An attempt was made to execute an invalid lock sequence.
STATUS_INVALID_VIEW_SIZE0xC000001F{Invalid Mapping} An attempt was made to create a view for a section which is bigger than the section.
STATUS_INVALID_FILE_FOR_SECTION0xC0000020{Bad File} The attributes of the specified mapping file for a section of memory cannot be read.
STATUS_ALREADY_COMMITTED0xC0000021{Already Committed} The specified address range is already committed.
STATUS_ACCESS_DENIED0xC0000022{Access Denied} A process has requested access to an object, but has not been granted those access rights.
STATUS_BUFFER_TOO_SMALL0xC0000023{Buffer Too Small} The buffer is too small to contain the entry. No information has been written to the buffer.
STATUS_OBJECT_TYPE_MISMATCH0xC0000024{Wrong Type} There is a mismatch between the type of object required by the requested operation and the type of object that is specified in the request.
STATUS_NONCONTINUABLE_EXCEPTION0xC0000025{EXCEPTION} Cannot Continue Windows cannot continue from this exception.
STATUS_INVALID_DISPOSITION0xC0000026An invalid exception disposition was returned by an exception handler.
STATUS_UNWIND0xC0000027Unwind exception code.
STATUS_BAD_STACK0xC0000028An invalid or unaligned stack was encountered during an unwind operation.
STATUS_INVALID_UNWIND_TARGET0xC0000029An invalid unwind target was encountered during an unwind operation.
STATUS_NOT_LOCKED0xC000002AAn attempt was made to unlock a page of memory which was not locked.
STATUS_PARITY_ERROR0xC000002BDevice parity error on I/O operation.
STATUS_UNABLE_TO_DECOMMIT_VM0xC000002CAn attempt was made to decommit uncommitted virtual memory.
STATUS_NOT_COMMITTED0xC000002DAn attempt was made to change the attributes on memory that has not been committed.
STATUS_INVALID_PORT_ATTRIBUTES0xC000002EInvalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort
STATUS_PORT_MESSAGE_TOO_LONG0xC000002FLength of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
STATUS_INVALID_PARAMETER_MIX0xC0000030An invalid combination of parameters was specified.
STATUS_INVALID_QUOTA_LOWER0xC0000031An attempt was made to lower a quota limit below the current usage.
STATUS_DISK_CORRUPT_ERROR0xC0000032{Corrupt Disk} The file system structure on the disk is corrupt and unusable. Please run the Chkdsk utility on the volume hs.
STATUS_OBJECT_NAME_INVALID0xC0000033Object Name invalid.
STATUS_OBJECT_NAME_NOT_FOUND0xC0000034Object Name not found.
STATUS_OBJECT_NAME_COLLISION0xC0000035Object Name already exists.
STATUS_PORT_DISCONNECTED0xC0000037Attempt to send a message to a disconnected communication port.
STATUS_DEVICE_ALREADY_ATTACHED0xC0000038An attempt was made to attach to a device that was already attached to another device.
STATUS_OBJECT_PATH_INVALID0xC0000039Object Path Component was not a directory object.
STATUS_OBJECT_PATH_NOT_FOUND0xC000003A{Path Not Found} The path hs does not exist.
STATUS_OBJECT_PATH_SYNTAX_BAD0xC000003BObject Path Component was not a directory object.
STATUS_DATA_OVERRUN0xC000003C{Data Overrun} A data overrun error occurred.
STATUS_DATA_LATE_ERROR0xC000003D{Data Late} A data late error occurred.
STATUS_DATA_ERROR0xC000003E{Data Error} An error in reading or writing data occurred.
STATUS_CRC_ERROR0xC000003F{Bad CRC} A cyclic redundancy check (CRC) checksum error occurred.
STATUS_SECTION_TOO_BIG0xC0000040{Section Too Large} The specified section is too big to map the file.
STATUS_PORT_CONNECTION_REFUSED0xC0000041The NtConnectPort request is refused.
STATUS_INVALID_PORT_HANDLE0xC0000042The type of port handle is invalid for the operation requested.
STATUS_SHARING_VIOLATION0xC0000043A file cannot be opened because the share access flags are incompatible.
STATUS_QUOTA_EXCEEDED0xC0000044Insufficient quota exists to complete the operation
STATUS_INVALID_PAGE_PROTECTION0xC0000045The specified page protection was not valid.
STATUS_MUTANT_NOT_OWNED0xC0000046An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.
STATUS_SEMAPHORE_LIMIT_EXCEEDED0xC0000047An attempt was made to release a semaphore such that its maximum count would have been exceeded.
STATUS_PORT_ALREADY_SET0xC0000048An attempt to set a process's DebugPort or ExceptionPort was made, but a port already exists in the process or an attempt to set a file's CompletionPort made, but a port was already set in the file or an attempt to set an ALPC port's associated completion port was made, but it is already set.
STATUS_SECTION_NOT_IMAGE0xC0000049An attempt was made to query image information on a section which does not map an image.
STATUS_SUSPEND_COUNT_EXCEEDED0xC000004AAn attempt was made to suspend a thread whose suspend count was at its maximum.
STATUS_THREAD_IS_TERMINATING0xC000004BAn attempt was made to access a thread that has begun termination.
STATUS_BAD_WORKING_SET_LIMIT0xC000004CAn attempt was made to set the working set limit to an invalid value (minimum greater than maximum, etc).
STATUS_INCOMPATIBLE_FILE_MAP0xC000004DA section was created to map a file which is not compatible to an already existing section which maps the same file.
STATUS_SECTION_PROTECTION0xC000004EA view to a section specifies a protection which is incompatible with the initial view's protection.
STATUS_EAS_NOT_SUPPORTED0xC000004FAn operation involving EAs failed because the file system does not support EAs.
STATUS_EA_TOO_LARGE0xC0000050An EA operation failed because EA set is too large.
STATUS_NONEXISTENT_EA_ENTRY0xC0000051An EA operation failed because the name or EA index is invalid.
STATUS_NO_EAS_ON_FILE0xC0000052The file for which EAs were requested has no EAs.
STATUS_EA_CORRUPT_ERROR0xC0000053The EA is corrupt and non-readable.
STATUS_FILE_LOCK_CONFLICT0xC0000054A requested read/write cannot be granted due to a conflicting file lock.
STATUS_LOCK_NOT_GRANTED0xC0000055A requested file lock cannot be granted due to other existing locks.
STATUS_DELETE_PENDING0xC0000056A non close operation has been requested of a file object with a delete pending.
STATUS_CTL_FILE_NOT_SUPPORTED0xC0000057An attempt was made to set the control attribute on a file. This attribute is not supported in the target file system.
STATUS_UNKNOWN_REVISION0xC0000058Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of.
STATUS_REVISION_MISMATCH0xC0000059Indicates two revision levels are incompatible.
STATUS_INVALID_OWNER0xC000005AIndicates a particular Security ID may not be assigned as the owner of an object.
STATUS_INVALID_PRIMARY_GROUP0xC000005BIndicates a particular Security ID may not be assigned as the primary group of an object.
STATUS_NO_IMPERSONATION_TOKEN0xC000005CAn attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
STATUS_CANT_DISABLE_MANDATORY0xC000005DA mandatory group may not be disabled.
STATUS_NO_LOGON_SERVERS0xC000005EThere are currently no logon servers available to service the logon request.
STATUS_NO_SUCH_LOGON_SESSION0xC000005FA specified logon session does not exist. It may already have been terminated.
STATUS_NO_SUCH_PRIVILEGE0xC0000060A specified privilege does not exist.
STATUS_PRIVILEGE_NOT_HELD0xC0000061A required privilege is not held by the client.
STATUS_INVALID_ACCOUNT_NAME0xC0000062The name provided is not a properly formed account name.
STATUS_USER_EXISTS0xC0000063The specified account already exists.
STATUS_NO_SUCH_USER0xC0000064The specified account does not exist.
STATUS_GROUP_EXISTS0xC0000065The specified group already exists.
STATUS_NO_SUCH_GROUP0xC0000066The specified group does not exist.
STATUS_MEMBER_IN_GROUP0xC0000067The specified user account is already in the specified group account. Also used to indicate a group cannot be deleted because it contains a member.
STATUS_MEMBER_NOT_IN_GROUP0xC0000068The specified user account is not a member of the specified group account.
STATUS_LAST_ADMIN0xC0000069Indicates the requested operation would disable, delete or could prevent logon for an administration account. This is not allowed to prevent creating a situation in which the system cannot be administrated.
STATUS_WRONG_PASSWORD0xC000006AWhen trying to update a password, this return status indicates that the value provided as the current password is not correct.
STATUS_ILL_FORMED_PASSWORD0xC000006BWhen trying to update a password, this return status indicates that the value provided for the new password contains values that are not allowed in passwords.
STATUS_PASSWORD_RESTRICTION0xC000006CWhen trying to update a password, this status indicates that some password update rule has been violated. For example, the password may not meet length criteria.
STATUS_LOGON_FAILURE0xC000006DThe attempted logon is invalid. This is either due to a bad username or authentication information.
STATUS_ACCOUNT_RESTRICTION0xC000006EIndicates a referenced user name and authentication information are valid, but some user account restriction has prevented successful authentication (such as time-of-day restrictions).
STATUS_INVALID_LOGON_HOURS0xC000006FThe user account has time restrictions and may not be logged onto at this time.
STATUS_INVALID_WORKSTATION0xC0000070The user account is restricted such that it may not be used to log on from the source workstation.
STATUS_PASSWORD_EXPIRED0xC0000071The user account's password has expired.
STATUS_ACCOUNT_DISABLED0xC0000072The referenced account is currently disabled and may not be logged on to.
STATUS_NONE_MAPPED0xC0000073None of the information to be translated has been translated.
STATUS_TOO_MANY_LUIDS_REQUESTED0xC0000074The number of LUIDs requested may not be allocated with a single allocation.
STATUS_LUIDS_EXHAUSTED0xC0000075Indicates there are no more LUIDs to allocate.
STATUS_INVALID_SUB_AUTHORITY0xC0000076Indicates the sub-authority value is invalid for the particular use.
STATUS_INVALID_ACL0xC0000077Indicates the ACL structure is not valid.
STATUS_INVALID_SID0xC0000078Indicates the SID structure is not valid.
STATUS_INVALID_SECURITY_DESCR0xC0000079Indicates the SECURITY_DESCRIPTOR structure is not valid.
STATUS_PROCEDURE_NOT_FOUND0xC000007AIndicates the specified procedure address cannot be found in the DLL.
STATUS_INVALID_IMAGE_FORMAT0xC000007B{Bad Image} hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x
STATUS_NO_TOKEN0xC000007CAn attempt was made to reference a token that doesn't exist. This is typically done by referencing the token associated with a thread when the thread is not impersonating a client.
STATUS_BAD_INHERITANCE_ACL0xC000007DIndicates that an attempt to build either an inherited ACL or ACE was not successful. This can be caused by a number of things. One of the more probable causes is the replacement of a CreatorId with an SID that didn't fit into the ACE or ACL.
STATUS_RANGE_NOT_LOCKED0xC000007EThe range specified in NtUnlockFile was not locked.
STATUS_DISK_FULL0xC000007FAn operation failed because the disk was full.
STATUS_SERVER_DISABLED0xC0000080The GUID allocation server is [already] disabled at the moment.
STATUS_SERVER_NOT_DISABLED0xC0000081The GUID allocation server is [already] enabled at the moment.
STATUS_TOO_MANY_GUIDS_REQUESTED0xC0000082Too many GUIDs were requested from the allocation server at once.
STATUS_GUIDS_EXHAUSTED0xC0000083The GUIDs could not be allocated because the Authority Agent was exhausted.
STATUS_INVALID_ID_AUTHORITY0xC0000084The value provided was an invalid value for an identifier authority.
STATUS_AGENTS_EXHAUSTED0xC0000085There are no more authority agent values available for the given identifier authority value.
STATUS_INVALID_VOLUME_LABEL0xC0000086An invalid volume label has been specified.
STATUS_SECTION_NOT_EXTENDED0xC0000087A mapped section could not be extended.
STATUS_NOT_MAPPED_DATA0xC0000088Specified section to flush does not map a data file.
STATUS_RESOURCE_DATA_NOT_FOUND0xC0000089Indicates the specified image file did not contain a resource section.
STATUS_RESOURCE_TYPE_NOT_FOUND0xC000008AIndicates the specified resource type cannot be found in the image file.
STATUS_RESOURCE_NAME_NOT_FOUND0xC000008BIndicates the specified resource name cannot be found in the image file.
STATUS_ARRAY_BOUNDS_EXCEEDED0xC000008C{EXCEPTION} Array bounds exceeded.
STATUS_FLOAT_DENORMAL_OPERAND0xC000008D{EXCEPTION} Floating-point denormal operand.
STATUS_FLOAT_DIVIDE_BY_ZERO0xC000008E{EXCEPTION} Floating-point division by zero.
STATUS_FLOAT_INEXACT_RESULT0xC000008F{EXCEPTION} Floating-point inexact result.
STATUS_FLOAT_INVALID_OPERATION0xC0000090{EXCEPTION} Floating-point invalid operation.
STATUS_FLOAT_OVERFLOW0xC0000091{EXCEPTION} Floating-point overflow.
STATUS_FLOAT_STACK_CHECK0xC0000092{EXCEPTION} Floating-point stack check.
STATUS_FLOAT_UNDERFLOW0xC0000093{EXCEPTION} Floating-point underflow.
STATUS_INTEGER_DIVIDE_BY_ZERO0xC0000094{EXCEPTION} Integer division by zero.
STATUS_INTEGER_OVERFLOW0xC0000095{EXCEPTION} Integer overflow.
STATUS_PRIVILEGED_INSTRUCTION0xC0000096{EXCEPTION} Privileged instruction.
STATUS_TOO_MANY_PAGING_FILES0xC0000097An attempt was made to install more paging files than the system supports.
STATUS_FILE_INVALID0xC0000098The volume for a file has been externally altered such that the opened file is no longer valid.
STATUS_ALLOTTED_SPACE_EXCEEDED0xC0000099When a block of memory is allotted for future updates, such as the memory allocated to hold discretionary access control and primary group information, successive updates may exceed the amount of memory originally allotted. Since quota may already have been charged to several processes which have handles to the object, it is not reasonable to alter the size of the allocated memory. Instead, a request that requires more memory than has been allotted must fail and the STATUS_ALLOTED_SPACE_EXCEEDED error returned.
STATUS_INSUFFICIENT_RESOURCES0xC000009AInsufficient system resources exist to complete the API.
STATUS_DFS_EXIT_PATH_FOUND0xC000009BAn attempt has been made to open a DFS exit path control file.
STATUS_DEVICE_DATA_ERROR0xC000009CSTATUS_DEVICE_DATA_ERROR
STATUS_DEVICE_NOT_CONNECTED0xC000009DSTATUS_DEVICE_NOT_CONNECTED
STATUS_DEVICE_POWER_FAILURE0xC000009ESTATUS_DEVICE_POWER_FAILURE
STATUS_FREE_VM_NOT_AT_BASE0xC000009FVirtual memory cannot be freed as base address is not the base of the region and a region size of zero was specified.
STATUS_MEMORY_NOT_ALLOCATED0xC00000A0An attempt was made to free virtual memory which is not allocated.
STATUS_WORKING_SET_QUOTA0xC00000A1The working set is not big enough to allow the requested pages to be locked.
STATUS_MEDIA_WRITE_PROTECTED0xC00000A2{Write Protect Error} The disk cannot be written to because it is write protected. Please remove the write protection from the volume hs in drive hs.
STATUS_DEVICE_NOT_READY0xC00000A3{Drive Not Ready} The drive is not ready for use; its door may be open. Please check drive hs and make sure that a disk is inserted and that the drive door is closed.
STATUS_INVALID_GROUP_ATTRIBUTES0xC00000A4The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
STATUS_BAD_IMPERSONATION_LEVEL0xC00000A5A specified impersonation level is invalid. Also used to indicate a required impersonation level was not provided.
STATUS_CANT_OPEN_ANONYMOUS0xC00000A6An attempt was made to open an Anonymous level token. Anonymous tokens may not be opened.
STATUS_BAD_VALIDATION_CLASS0xC00000A7The validation information class requested was invalid.
STATUS_BAD_TOKEN_TYPE0xC00000A8The type of a token object is inappropriate for its attempted use.
STATUS_BAD_MASTER_BOOT_RECORD0xC00000A9The type of a token object is inappropriate for its attempted use.
STATUS_INSTRUCTION_MISALIGNMENT0xC00000AAAn attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.
STATUS_INSTANCE_NOT_AVAILABLE0xC00000ABThe maximum named pipe instance count has been reached.
STATUS_PIPE_NOT_AVAILABLE0xC00000ACAn instance of a named pipe cannot be found in the listening state.
STATUS_INVALID_PIPE_STATE0xC00000ADThe named pipe is not in the connected or closing state.
STATUS_PIPE_BUSY0xC00000AEThe specified pipe is set to complete operations and there are current I/O operations queued so it cannot be changed to queue operations.
STATUS_ILLEGAL_FUNCTION0xC00000AFThe specified handle is not open to the server end of the named pipe.
STATUS_PIPE_DISCONNECTED0xC00000B0The specified named pipe is in the disconnected state.
STATUS_PIPE_CLOSING0xC00000B1The specified named pipe is in the closing state.
STATUS_PIPE_CONNECTED0xC00000B2The specified named pipe is in the connected state.
STATUS_PIPE_LISTENING0xC00000B3The specified named pipe is in the listening state.
STATUS_INVALID_READ_MODE0xC00000B4The specified named pipe is not in message mode.
STATUS_IO_TIMEOUT0xC00000B5{Device Timeout} The specified I/O operation on hs was not completed before the time-out period expired.
STATUS_FILE_FORCED_CLOSED0xC00000B6The specified file has been closed by another process.
STATUS_PROFILING_NOT_STARTED0xC00000B7Profiling not started.
STATUS_PROFILING_NOT_STOPPED0xC00000B8Profiling not stopped.
STATUS_COULD_NOT_INTERPRET0xC00000B9The passed ACL did not contain the minimum required information.
STATUS_FILE_IS_A_DIRECTORY0xC00000BAThe file that was specified as a target is a directory and the caller specified that it could be anything but a directory.
STATUS_NOT_SUPPORTED0xC00000BBThe request is not supported.
STATUS_REMOTE_NOT_LISTENING0xC00000BCThis remote computer is not listening.
STATUS_DUPLICATE_NAME0xC00000BDA duplicate name exists on the network.
STATUS_BAD_NETWORK_PATH0xC00000BEThe network path cannot be located.
STATUS_NETWORK_BUSY0xC00000BFThe network is busy.
STATUS_DEVICE_DOES_NOT_EXIST0xC00000C0This device does not exist.
STATUS_TOO_MANY_COMMANDS0xC00000C1The network BIOS command limit has been reached.
STATUS_ADAPTER_HARDWARE_ERROR0xC00000C2An I/O adapter hardware error has occurred.
STATUS_INVALID_NETWORK_RESPONSE0xC00000C3The network responded incorrectly.
STATUS_UNEXPECTED_NETWORK_ERROR0xC00000C4An unexpected network error occurred.
STATUS_BAD_REMOTE_ADAPTER0xC00000C5The remote adapter is not compatible.
STATUS_PRINT_QUEUE_FULL0xC00000C6The printer queue is full.
STATUS_NO_SPOOL_SPACE0xC00000C7Space to store the file waiting to be printed is not available on the server.
STATUS_PRINT_CANCELLED0xC00000C8The requested print file has been canceled.
STATUS_NETWORK_NAME_DELETED0xC00000C9The network name was deleted.
STATUS_NETWORK_ACCESS_DENIED0xC00000CANetwork access is denied.
STATUS_BAD_DEVICE_TYPE0xC00000CB{Incorrect Network Resource Type} The specified device type (LPT, for example) conflicts with the actual device type on the remote resource.
STATUS_BAD_NETWORK_NAME0xC00000CC{Network Name Not Found} The specified share name cannot be found on the remote server.
STATUS_TOO_MANY_NAMES0xC00000CDThe name limit for the local computer network adapter card was exceeded.
STATUS_TOO_MANY_SESSIONS0xC00000CEThe network BIOS session limit was exceeded.
STATUS_SHARING_PAUSED0xC00000CFFile sharing has been temporarily paused.
STATUS_REQUEST_NOT_ACCEPTED0xC00000D0No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
STATUS_REDIRECTOR_PAUSED0xC00000D1Print or disk redirection is temporarily paused.
STATUS_NET_WRITE_FAULT0xC00000D2A network data fault occurred.
STATUS_PROFILING_AT_LIMIT0xC00000D3The number of active profiling objects is at the maximum and no more may be started.
STATUS_NOT_SAME_DEVICE0xC00000D4{Incorrect Volume} The target file of a rename request is located on a different device than the source of the rename request.
STATUS_FILE_RENAMED0xC00000D5The file specified has been renamed and thus cannot be modified.
STATUS_VIRTUAL_CIRCUIT_CLOSED0xC00000D6{Network Request Timeout} The session with a remote server has been disconnected because the time-out interval for a request has expired.
STATUS_NO_SECURITY_ON_OBJECT0xC00000D7Indicates an attempt was made to operate on the security of an object that does not have security associated with it.
STATUS_CANT_WAIT0xC00000D8Used to indicate that an operation cannot continue without blocking for I/O.
STATUS_PIPE_EMPTY0xC00000D9Used to indicate that a read operation was done on an empty pipe.
STATUS_CANT_ACCESS_DOMAIN_INFO0xC00000DAConfiguration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.
STATUS_CANT_TERMINATE_SELF0xC00000DBIndicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.
STATUS_INVALID_SERVER_STATE0xC00000DCIndicates the Sam Server was in the wrong state to perform the desired operation.
STATUS_INVALID_DOMAIN_STATE0xC00000DDIndicates the Domain was in the wrong state to perform the desired operation.
STATUS_INVALID_DOMAIN_ROLE0xC00000DEThis operation is only allowed for the Primary Domain Controller of the domain.
STATUS_NO_SUCH_DOMAIN0xC00000DFThe specified Domain did not exist.
STATUS_DOMAIN_EXISTS0xC00000E0The specified Domain already exists.
STATUS_DOMAIN_LIMIT_EXCEEDED0xC00000E1An attempt was made to exceed the limit on the number of domains per server for this release.
STATUS_OPLOCK_NOT_GRANTED0xC00000E2Error status returned when oplock request is denied.
STATUS_INVALID_OPLOCK_PROTOCOL0xC00000E3Error status returned when an invalid oplock acknowledgment is received by a file system.
STATUS_INTERNAL_DB_CORRUPTION0xC00000E4This error indicates that the requested operation cannot be completed due to a catastrophic media failure or on-disk data structure corruption.
STATUS_INTERNAL_ERROR0xC00000E5An internal error occurred.
STATUS_GENERIC_NOT_MAPPED0xC00000E6Indicates generic access types were contained in an access mask which should already be mapped to non-generic access types.
STATUS_BAD_DESCRIPTOR_FORMAT0xC00000E7Indicates a security descriptor is not in the necessary format (absolute or self-relative).
STATUS_INVALID_USER_BUFFER0xC00000E8An access to a user buffer failed at an "expected" point in time. This code is defined since the caller does not want to accept STATUS_ACCESS_VIOLATION in its filter.
STATUS_UNEXPECTED_IO_ERROR0xC00000E9If an I/O error is returned which is not defined in the standard FsRtl filter, it is converted to the following error which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
STATUS_UNEXPECTED_MM_CREATE_ERR0xC00000EAIf an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
STATUS_UNEXPECTED_MM_MAP_ERROR0xC00000EBIf an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
STATUS_UNEXPECTED_MM_EXTEND_ERR0xC00000ECIf an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
STATUS_NOT_LOGON_PROCESS0xC00000EDThe requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
STATUS_LOGON_SESSION_EXISTS0xC00000EEAn attempt has been made to start a new session manager or LSA logon session with an ID that is already in use.
STATUS_INVALID_PARAMETER_10xC00000EFAn invalid parameter was passed to a service or function as the first argument.
STATUS_INVALID_PARAMETER_20xC00000F0An invalid parameter was passed to a service or function as the second argument.
STATUS_INVALID_PARAMETER_30xC00000F1An invalid parameter was passed to a service or function as the third argument.
STATUS_INVALID_PARAMETER_40xC00000F2An invalid parameter was passed to a service or function as the fourth argument.
STATUS_INVALID_PARAMETER_50xC00000F3An invalid parameter was passed to a service or function as the fifth argument.
STATUS_INVALID_PARAMETER_60xC00000F4An invalid parameter was passed to a service or function as the sixth argument.
STATUS_INVALID_PARAMETER_70xC00000F5An invalid parameter was passed to a service or function as the seventh argument.
STATUS_INVALID_PARAMETER_80xC00000F6An invalid parameter was passed to a service or function as the eighth argument.
STATUS_INVALID_PARAMETER_90xC00000F7An invalid parameter was passed to a service or function as the ninth argument.
STATUS_INVALID_PARAMETER_100xC00000F8An invalid parameter was passed to a service or function as the tenth argument.
STATUS_INVALID_PARAMETER_110xC00000F9An invalid parameter was passed to a service or function as the eleventh argument.
STATUS_INVALID_PARAMETER_120xC00000FAAn invalid parameter was passed to a service or function as the twelfth argument.
STATUS_REDIRECTOR_NOT_STARTED0xC00000FBAn attempt was made to access a network file, but the network software was not yet started.
STATUS_REDIRECTOR_STARTED0xC00000FCAn attempt was made to start the redirector, but the redirector has already been started.
STATUS_STACK_OVERFLOW0xC00000FDA new guard page for the stack cannot be created.
STATUS_NO_SUCH_PACKAGE0xC00000FEA specified authentication package is unknown.
STATUS_BAD_FUNCTION_TABLE0xC00000FFA malformed function table was encountered during an unwind operation.
STATUS_VARIABLE_NOT_FOUND0xC0000100Indicates the specified environment variable name was not found in the specified environment block.
STATUS_DIRECTORY_NOT_EMPTY0xC0000101Indicates that the directory trying to be deleted is not empty.
STATUS_FILE_CORRUPT_ERROR0xC0000102{Corrupt File} The file or directory hs is corrupt and unreadable. Please run the Chkdsk utility.
STATUS_NOT_A_DIRECTORY0xC0000103A requested opened file is not a directory.
STATUS_BAD_LOGON_SESSION_STATE0xC0000104The logon session is not in a state that is consistent with the requested operation.
STATUS_LOGON_SESSION_COLLISION0xC0000105An internal LSA error has occurred. An authentication package has requested the creation of a Logon Session but the ID of an already existing Logon Session has been specified.
STATUS_NAME_TOO_LONG0xC0000106A specified name string is too long for its intended use.
STATUS_FILES_OPEN0xC0000107The user attempted to force close the files on a redirected drive, but there were opened files on the drive, and the user did not specify a sufficient level of force.
STATUS_CONNECTION_IN_USE0xC0000108The user attempted to force close the files on a redirected drive, but there were opened directories on the drive, and the user did not specify a sufficient level of force.
STATUS_MESSAGE_NOT_FOUND0xC0000109RtlFindMessage could not locate the requested message ID in the message table resource.
STATUS_PROCESS_IS_TERMINATING0xC000010AAn attempt was made to access an exiting process.
STATUS_INVALID_LOGON_TYPE0xC000010BIndicates an invalid value has been provided for the LogonType requested.
STATUS_NO_GUID_TRANSLATION0xC000010CIndicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail.
STATUS_CANNOT_IMPERSONATE0xC000010DIndicates that an attempt has been made to impersonate via a named pipe that has not yet been read from.
STATUS_IMAGE_ALREADY_LOADED0xC000010EIndicates that the specified image is already loaded.
STATUS_ABIOS_NOT_PRESENT0xC000010FSTATUS_ABIOS_NOT_PRESENT
STATUS_ABIOS_LID_NOT_EXIST0xC0000110STATUS_ABIOS_LID_NOT_EXIST
STATUS_ABIOS_LID_ALREADY_OWNED0xC0000111STATUS_ABIOS_LID_ALREADY_OWNED
STATUS_ABIOS_NOT_LID_OWNER0xC0000112STATUS_ABIOS_NOT_LID_OWNER
STATUS_ABIOS_INVALID_COMMAND0xC0000113STATUS_ABIOS_INVALID_COMMAND
STATUS_ABIOS_INVALID_LID0xC0000114STATUS_ABIOS_INVALID_LID
STATUS_ABIOS_INVALID_SELECTOR0xC0000116STATUS_ABIOS_INVALID_SELECTOR
STATUS_NO_LDT0xC0000117Indicates that an attempt was made to change the size of the LDT for a process that has no LDT.
STATUS_INVALID_LDT_SIZE0xC0000118Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.
STATUS_INVALID_LDT_OFFSET0xC0000119Indicates that the starting value for the LDT information was not an integral multiple of the selector size.
STATUS_INVALID_LDT_DESCRIPTOR0xC000011AIndicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.
STATUS_INVALID_IMAGE_NE_FORMAT0xC000011BThe specified image file did not have the correct format. It appears to be NE format.
STATUS_RXACT_INVALID_STATE0xC000011CIndicates that the transaction state of a registry sub-tree is incompatible with the requested operation. For example, a request has been made to start a new transaction with one already in progress, or a request has been made to apply a transaction when one is not currently in progress.
STATUS_RXACT_COMMIT_FAILURE0xC000011DIndicates an error has occurred during a registry transaction commit. The database has been left in an unknown, but probably inconsistent, state. The state of the registry transaction is left as COMMITTING.
STATUS_MAPPED_FILE_SIZE_ZERO0xC000011EAn attempt was made to map a file of size zero with the maximum size specified as zero.
STATUS_TOO_MANY_OPENED_FILES0xC000011FToo many files are opened on a remote server. This error should only be returned by the Windows redirector on a remote drive.
STATUS_CANCELLED0xC0000120The I/O request was canceled.
STATUS_CANNOT_DELETE0xC0000121An attempt has been made to remove a file or directory that cannot be deleted.
STATUS_INVALID_COMPUTER_NAME0xC0000122Indicates a name specified as a remote computer name is syntactically invalid.
STATUS_FILE_DELETED0xC0000123An I/O request other than close was performed on a file after it has been deleted, which can only happen to a request which did not complete before the last handle was closed via NtClose.
STATUS_SPECIAL_ACCOUNT0xC0000124Indicates an operation has been attempted on a built-in (special) SAM account which is incompatible with built-in accounts. For example, built-in accounts cannot be deleted.
STATUS_SPECIAL_GROUP0xC0000125The operation requested may not be performed on the specified group because it is a built-in special group.
STATUS_SPECIAL_USER0xC0000126The operation requested may not be performed on the specified user because it is a built-in special user.
STATUS_MEMBERS_PRIMARY_GROUP0xC0000127Indicates a member cannot be removed from a group because the group is currently the member's primary group.
STATUS_FILE_CLOSED0xC0000128An I/O request other than close and several other special case operations was attempted using a file object that had already been closed.
STATUS_TOO_MANY_THREADS0xC0000129Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.
STATUS_THREAD_NOT_IN_PROCESS0xC000012AAn attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.
STATUS_TOKEN_ALREADY_IN_USE0xC000012BAn attempt was made to establish a token for use as a primary token but the token is already in use. A token can only be the primary token of one process at a time.
STATUS_PAGEFILE_QUOTA_EXCEEDED0xC000012CPage file quota was exceeded.
STATUS_COMMITMENT_LIMIT0xC000012D{Out of Virtual Memory} Your system is low on virtual memory. To ensure that Windows runs properly, increase the size of your virtual memory paging file. For more information, see Help.
STATUS_INVALID_IMAGE_LE_FORMAT0xC000012EThe specified image file did not have the correct format, it appears to be LE format.
STATUS_INVALID_IMAGE_NOT_MZ0xC000012FThe specified image file did not have the correct format, it did not have an initial MZ.
STATUS_INVALID_IMAGE_PROTECT0xC0000130The specified image file did not have the correct format, it did not have a proper e_lfarlc in the MZ header.
STATUS_INVALID_IMAGE_WIN_160xC0000131The specified image file did not have the correct format, it appears to be a 16-bit Windows image.
STATUS_LOGON_SERVER_CONFLICT0xC0000132The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
STATUS_TIME_DIFFERENCE_AT_DC0xC0000133The time at the Primary Domain Controller is different than the time at the Backup Domain Controller or member server by too large an amount.
STATUS_SYNCHRONIZATION_REQUIRED0xC0000134The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.
STATUS_DLL_NOT_FOUND0xC0000135The program can't start because hs is missing from your computer. Try reinstalling the program to fix this problem.
STATUS_OPEN_FAILED0xC0000136The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
STATUS_IO_PRIVILEGE_FAILED0xC0000137{Privilege Failed} The I/O permissions for the process could not be changed.
STATUS_ORDINAL_NOT_FOUND0xC0000138{Ordinal Not Found} The ordinal ld could not be located in the dynamic link library hs.
STATUS_ENTRYPOINT_NOT_FOUND0xC0000139{Entry Point Not Found} The procedure entry point hs could not be located in the dynamic link library hs.
STATUS_CONTROL_C_EXIT0xC000013A{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.
STATUS_LOCAL_DISCONNECT0xC000013B{Virtual Circuit Closed} The network transport on your computer has closed a network connection. There may or may not be I/O requests outstanding.
STATUS_REMOTE_DISCONNECT0xC000013C{Virtual Circuit Closed} The network transport on a remote computer has closed a network connection. There may or may not be I/O requests outstanding.
STATUS_REMOTE_RESOURCES0xC000013D{Insufficient Resources on Remote Computer} The remote computer has insufficient resources to complete the network request. For instance, there may not be enough memory available on the remote computer to carry out the request at this time.
STATUS_LINK_FAILED0xC000013E{Virtual Circuit Closed} An existing connection (virtual circuit) has been broken at the remote computer. There is probably something wrong with the network software protocol or the network hardware on the remote computer.
STATUS_LINK_TIMEOUT0xC000013F{Virtual Circuit Closed} The network transport on your computer has closed a network connection because it had to wait too long for a response from the remote computer.
STATUS_INVALID_CONNECTION0xC0000140The connection handle given to the transport was invalid.
STATUS_INVALID_ADDRESS0xC0000141The address handle given to the transport was invalid.
STATUS_DLL_INIT_FAILED0xC0000142{DLL Initialization Failed} Initialization of the dynamic link library hs failed. The process is terminating abnormally.
STATUS_MISSING_SYSTEMFILE0xC0000143{Missing System File} The required system file hs is bad or missing.
STATUS_UNHANDLED_EXCEPTION0xC0000144{Application Error} The exception s (0x
STATUS_APP_INIT_FAILURE0xC0000145{Application Error} The application was unable to start correctly (0xlx). Click OK to close the application.
STATUS_PAGEFILE_CREATE_FAILED0xC0000146{Unable to Create Paging File} The creation of the paging file hs failed (lx). The requested size was ld.
STATUS_NO_PAGEFILE0xC0000147{No Paging File Specified} No paging file was specified in the system configuration.
STATUS_INVALID_LEVEL0xC0000148{Incorrect System Call Level} An invalid level was passed into the specified system call.
STATUS_WRONG_PASSWORD_CORE0xC0000149{Incorrect Password to LAN Manager Server} You specified an incorrect password to a LAN Manager 2.x or MS-NET server.
STATUS_ILLEGAL_FLOAT_CONTEXT0xC000014A{EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present.
STATUS_PIPE_BROKEN0xC000014BThe pipe operation has failed because the other end of the pipe has been closed.
STATUS_REGISTRY_CORRUPT0xC000014C{The Registry Is Corrupt} The structure of one of the files that contains Registry data is corrupt, or the image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt.
STATUS_REGISTRY_IO_FAILED0xC000014DAn I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.
STATUS_NO_EVENT_PAIR0xC000014EAn event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.
STATUS_UNRECOGNIZED_VOLUME0xC000014FThe volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt.
STATUS_SERIAL_NO_DEVICE_INITED0xC0000150No serial device was successfully initialized. The serial driver will unload.
STATUS_NO_SUCH_ALIAS0xC0000151The specified local group does not exist.
STATUS_MEMBER_NOT_IN_ALIAS0xC0000152The specified account name is not a member of the group.
STATUS_MEMBER_IN_ALIAS0xC0000153The specified account name is already a member of the group.
STATUS_ALIAS_EXISTS0xC0000154The specified local group already exists.
STATUS_LOGON_NOT_GRANTED0xC0000155A requested type of logon (e.g., Interactive, Network, Service) is not granted by the target system's local security policy. Please ask the system administrator to grant the necessary form of logon.
STATUS_TOO_MANY_SECRETS0xC0000156The maximum number of secrets that may be stored in a single system has been exceeded. The length and number of secrets is limited to satisfy United States State Department export restrictions.
STATUS_SECRET_TOO_LONG0xC0000157The length of a secret exceeds the maximum length allowed. The length and number of secrets is limited to satisfy United States State Department export restrictions.
STATUS_INTERNAL_DB_ERROR0xC0000158The Local Security Authority (LSA) database contains an internal inconsistency.
STATUS_FULLSCREEN_MODE0xC0000159The requested operation cannot be performed in fullscreen mode.
STATUS_TOO_MANY_CONTEXT_IDS0xC000015ADuring a logon attempt, the user's security context accumulated too many security IDs. This is a very unusual situation. Remove the user from some global or local groups to reduce the number of security ids to incorporate into the security context.
STATUS_LOGON_TYPE_NOT_GRANTED0xC000015BA user has requested a type of logon (e.g., interactive or network) that has not been granted. An administrator has control over who may logon interactively and through the network.
STATUS_NOT_REGISTRY_FILE0xC000015CThe system has attempted to load or restore a file into the registry, and the specified file is not in the format of a registry file.
STATUS_FT_MISSING_MEMBER0xC000015FAn attempt was made to explicitly access the secondary copy of information via a device control to the Fault Tolerance driver and the secondary copy is not present in the system.
STATUS_ILL_FORMED_SERVICE_ENTRY0xC0000160A configuration registry node representing a driver service entry was ill-formed and did not contain required value entries.
STATUS_ILLEGAL_CHARACTER0xC0000161An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.
STATUS_UNMAPPABLE_CHARACTER0xC0000162No mapping for the Unicode character exists in the target multi-byte code page.
STATUS_UNDEFINED_CHARACTER0xC0000163The Unicode character is not defined in the Unicode character set installed on the system.
STATUS_FLOPPY_VOLUME0xC0000164The paging file cannot be created on a floppy diskette.
STATUS_FLOPPY_ID_MARK_NOT_FOUND0xC0000165{Floppy Disk Error} While accessing a floppy disk, an ID address mark was not found.
STATUS_FLOPPY_WRONG_CYLINDER0xC0000166{Floppy Disk Error} While accessing a floppy disk, the track address from the sector ID field was found to be different than the track address maintained by the controller.
STATUS_FLOPPY_UNKNOWN_ERROR0xC0000167{Floppy Disk Error} The floppy disk controller reported an error that is not recognized by the floppy disk driver.
STATUS_FLOPPY_BAD_REGISTERS0xC0000168{Floppy Disk Error} While accessing a floppy-disk, the controller returned inconsistent results via its registers.
STATUS_DISK_RECALIBRATE_FAILED0xC0000169{Hard Disk Error} While accessing the hard disk, a recalibrate operation failed, even after retries.
STATUS_DISK_OPERATION_FAILED0xC000016A{Hard Disk Error} While accessing the hard disk, a disk operation failed even after retries.
STATUS_DISK_RESET_FAILED0xC000016B{Hard Disk Error} While accessing the hard disk, a disk controller reset was needed, but even that failed.
STATUS_SHARED_IRQ_BUSY0xC000016CAn attempt was made to open a device that was sharing an IRQ with other devices. At least one other device that uses that IRQ was already opened. Two concurrent opens of devices that share an IRQ and only work via interrupts is not supported for the particular bus type that the devices use.
STATUS_FT_ORPHANING0xC000016D{FT Orphaning} A disk that is part of a fault-tolerant volume can no longer be accessed.
STATUS_PARTITION_FAILURE0xC0000172Tape could not be partitioned.
STATUS_INVALID_BLOCK_LENGTH0xC0000173When accessing a new tape of a multivolume partition, the current blocksize is incorrect.
STATUS_DEVICE_NOT_PARTITIONED0xC0000174Tape partition information could not be found when loading a tape.
STATUS_UNABLE_TO_LOCK_MEDIA0xC0000175Attempt to lock the eject media mechanism fails.
STATUS_UNABLE_TO_UNLOAD_MEDIA0xC0000176Unload media fails.
STATUS_EOM_OVERFLOW0xC0000177Physical end of tape was detected.
STATUS_NO_MEDIA0xC0000178{No Media} There is no media in the drive. Please insert media into drive hs.
STATUS_NO_SUCH_MEMBER0xC000017AA member could not be added to or removed from the local group because the member does not exist.
STATUS_INVALID_MEMBER0xC000017BA new member could not be added to a local group because the member has the wrong account type.
STATUS_KEY_DELETED0xC000017CIllegal operation attempted on a registry key which has been marked for deletion.
STATUS_NO_LOG_SPACE0xC000017DSystem could not allocate required space in a registry log.
STATUS_TOO_MANY_SIDS0xC000017EToo many Sids have been specified.
STATUS_KEY_HAS_CHILDREN0xC0000180An attempt was made to create a symbolic link in a registry key that already has subkeys or values.
STATUS_CHILD_MUST_BE_VOLATILE0xC0000181An attempt was made to create a Stable subkey under a Volatile parent key.
STATUS_DRIVER_INTERNAL_ERROR0xC0000183An error was detected between two drivers or within an I/O driver.
STATUS_INVALID_DEVICE_STATE0xC0000184The device is not in a valid state to perform this request.
STATUS_IO_DEVICE_ERROR0xC0000185The I/O device reported an I/O error.
STATUS_DEVICE_PROTOCOL_ERROR0xC0000186A protocol error was detected between the driver and the device.
STATUS_BACKUP_CONTROLLER0xC0000187This operation is only allowed for the Primary Domain Controller of the domain.
STATUS_LOG_FILE_FULL0xC0000188Log file space is insufficient to support this operation.
STATUS_TOO_LATE0xC0000189A write operation was attempted to a volume after it was dismounted.
STATUS_NO_TRUST_LSA_SECRET0xC000018AThe workstation does not have a trust secret for the primary domain in the local LSA database.
STATUS_NO_TRUST_SAM_ACCOUNT0xC000018BThe SAM database on the Windows Server does not have a computer account for this workstation trust relationship.
STATUS_TRUSTED_DOMAIN_FAILURE0xC000018CThe logon request failed because the trust relationship between the primary domain and the trusted domain failed.
STATUS_EVENTLOG_FILE_CORRUPT0xC000018EThe Eventlog log file is corrupt.
STATUS_EVENTLOG_CANT_START0xC000018FNo Eventlog log file could be opened. The Eventlog service did not start.
STATUS_TRUST_FAILURE0xC0000190The network logon failed. This may be because the validation authority can't be reached.
STATUS_MUTANT_LIMIT_EXCEEDED0xC0000191An attempt was made to acquire a mutant such that its maximum count would have been exceeded.
STATUS_NETLOGON_NOT_STARTED0xC0000192An attempt was made to logon, but the netlogon service was not started.
STATUS_ACCOUNT_EXPIRED0xC0000193The user's account has expired.
STATUS_POSSIBLE_DEADLOCK0xC0000194{EXCEPTION} Possible deadlock condition.
STATUS_REMOTE_SESSION_LIMIT0xC0000196An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
STATUS_EVENTLOG_FILE_CHANGED0xC0000197The log file has changed between reads.
STATUS_FS_DRIVER_REQUIRED0xC000019CA volume has been accessed for which a file system driver is required that has not yet been loaded.
STATUS_INVALID_LOCK_RANGE0xC00001A1A requested file lock operation cannot be processed due to an invalid byte range.
STATUS_INVALID_ACE_CONDITION0xC00001A2{Invalid ACE Condition} The specified access control entry (ACE) contains an invalid condition.
STATUS_DUPLICATE_PRIVILEGES0xC00001A6Duplicate privileges were specified for the token.
STATUS_REPAIR_NEEDED0xC00001A8A portion of the file system requires repair.
STATUS_QUOTA_NOT_ENABLED0xC00001A9Quota support is not enabled on the system.
STATUS_NO_APPLICATION_PACKAGE0xC00001AAThe operation failed because the application is not part of an application package.
STATUS_NETWORK_OPEN_RESTRICTION0xC0000201A remote open failed because the network open restrictions were not satisfied.
STATUS_NO_USER_SESSION_KEY0xC0000202There is no user session key for the specified logon session.
STATUS_USER_SESSION_DELETED0xC0000203The remote user session has been deleted.
STATUS_RESOURCE_LANG_NOT_FOUND0xC0000204Indicates the specified resource language ID cannot be found in the image file.
STATUS_INSUFF_SERVER_RESOURCES0xC0000205Insufficient server resources exist to complete the request.
STATUS_INVALID_BUFFER_SIZE0xC0000206The size of the buffer is invalid for the specified operation.
STATUS_INVALID_ADDRESS_WILDCARD0xC0000208The transport rejected the network address specified due to an invalid use of a wildcard.
STATUS_TOO_MANY_ADDRESSES0xC0000209The transport address could not be opened because all the available addresses are in use.
STATUS_ADDRESS_ALREADY_EXISTS0xC000020AThe transport address could not be opened because it already exists.
STATUS_ADDRESS_CLOSED0xC000020BThe transport address is now closed.
STATUS_CONNECTION_DISCONNECTED0xC000020CThe transport connection is now disconnected.
STATUS_CONNECTION_RESET0xC000020DThe transport connection has been reset.
STATUS_TOO_MANY_NODES0xC000020EThe transport cannot dynamically acquire any more nodes.
STATUS_TRANSACTION_ABORTED0xC000020FThe transport aborted a pending transaction.
STATUS_TRANSACTION_TIMED_OUT0xC0000210The transport timed out a request waiting for a response.
STATUS_TRANSACTION_NO_RELEASE0xC0000211The transport did not receive a release for a pending response.
STATUS_TRANSACTION_NO_MATCH0xC0000212The transport did not find a transaction matching the specific token.
STATUS_TRANSACTION_RESPONDED0xC0000213The transport had previously responded to a transaction request.
STATUS_TRANSACTION_INVALID_ID0xC0000214The transport does not recognized the transaction request identifier specified.
STATUS_TRANSACTION_INVALID_TYPE0xC0000215The transport does not recognize the transaction request type specified.
STATUS_NOT_SERVER_SESSION0xC0000216The transport can only process the specified request on the server side of a session.
STATUS_NOT_CLIENT_SESSION0xC0000217The transport can only process the specified request on the client side of a session.
STATUS_DEBUG_ATTACH_FAILED0xC0000219{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.
STATUS_DATA_NOT_ACCEPTED0xC000021B{Data Not Accepted} The TDI client could not handle the data received during an indication.
STATUS_NO_BROWSER_SERVERS_FOUND0xC000021C{Unable to Retrieve Browser Server List} The list of servers for this workgroup is not currently available.
STATUS_VDM_HARD_ERROR0xC000021DNTVDM encountered a hard error.
STATUS_DRIVER_CANCEL_TIMEOUT0xC000021E{Cancel Timeout} The driver hs failed to complete a cancelled I/O request in the allotted time.
STATUS_REPLY_MESSAGE_MISMATCH0xC000021F{Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.
STATUS_MAPPED_ALIGNMENT0xC0000220{Mapped View Alignment Incorrect} An attempt was made to map a view of a file, but either the specified base address or the offset into the file were not aligned on the proper allocation granularity.
STATUS_IMAGE_CHECKSUM_MISMATCH0xC0000221{Bad Image Checksum} The image hs is possibly corrupt. The header checksum does not match the computed checksum.
STATUS_LOST_WRITEBEHIND_DATA0xC0000222{Delayed Write Failed} Windows was unable to save all the data for the file hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
STATUS_PASSWORD_MUST_CHANGE0xC0000224The user's password must be changed before signing in.
STATUS_NOT_FOUND0xC0000225The object was not found.
STATUS_NOT_TINY_STREAM0xC0000226The stream is not a tiny stream.
STATUS_RECOVERY_FAILURE0xC0000227A transaction recover failed.
STATUS_STACK_OVERFLOW_READ0xC0000228The request must be handled by the stack overflow code.
STATUS_FAIL_CHECK0xC0000229A consistency check failed.
STATUS_DUPLICATE_OBJECTID0xC000022AThe attempt to insert the ID in the index failed because the ID is already in the index.
STATUS_OBJECTID_EXISTS0xC000022BThe attempt to set the object's ID failed because the object already has an ID.
STATUS_CONVERT_TO_LARGE0xC000022CInternal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
STATUS_RETRY0xC000022DThe request needs to be retried.
STATUS_FOUND_OUT_OF_SCOPE0xC000022EThe attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
STATUS_ALLOCATE_BUCKET0xC000022FThe bucket array must be grown. Retry transaction after doing so.
STATUS_PROPSET_NOT_FOUND0xC0000230The property set specified does not exist on the object.
STATUS_MARSHALL_OVERFLOW0xC0000231The user/kernel marshalling buffer has overflowed.
STATUS_INVALID_VARIANT0xC0000232The supplied variant structure contains invalid data.
STATUS_ACCOUNT_LOCKED_OUT0xC0000234The user account has been automatically locked because too many invalid logon attempts or password change attempts have been requested.
STATUS_HANDLE_NOT_CLOSABLE0xC0000235NtClose was called on a handle that was protected from close via NtSetInformationObject.
STATUS_CONNECTION_REFUSED0xC0000236The transport connection attempt was refused by the remote system.
STATUS_GRACEFUL_DISCONNECT0xC0000237The transport connection was gracefully closed.
STATUS_ADDRESS_NOT_ASSOCIATED0xC0000239An address has not yet been associated with the transport endpoint.
STATUS_CONNECTION_INVALID0xC000023AAn operation was attempted on a nonexistent transport connection.
STATUS_CONNECTION_ACTIVE0xC000023BAn invalid operation was attempted on an active transport connection.
STATUS_NETWORK_UNREACHABLE0xC000023CThe remote network is not reachable by the transport.
STATUS_HOST_UNREACHABLE0xC000023DThe remote system is not reachable by the transport.
STATUS_PROTOCOL_UNREACHABLE0xC000023EThe remote system does not support the transport protocol.
STATUS_PORT_UNREACHABLE0xC000023FNo service is operating at the destination port of the transport on the remote system.
STATUS_REQUEST_ABORTED0xC0000240The request was aborted.
STATUS_CONNECTION_ABORTED0xC0000241The transport connection was aborted by the local system.
STATUS_BAD_COMPRESSION_BUFFER0xC0000242The specified buffer contains ill-formed data.
STATUS_USER_MAPPED_FILE0xC0000243The requested operation cannot be performed on a file with a user mapped section open.
STATUS_AUDIT_FAILED0xC0000244{Audit Failed} An attempt to generate a security audit failed.
STATUS_TIMER_RESOLUTION_NOT_SET0xC0000245The timer resolution was not previously set by the current process.
STATUS_CONNECTION_COUNT_LIMIT0xC0000246A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
STATUS_LOGIN_TIME_RESTRICTION0xC0000247Attempting to login during an unauthorized time of day for this account.
STATUS_LOGIN_WKSTA_RESTRICTION0xC0000248The account is not authorized to login from this station.
STATUS_IMAGE_MP_UP_MISMATCH0xC0000249{UP/MP Image Mismatch} The image hs has been modified for use on a uniprocessor system, but you are running it on a multiprocessor machine. Please reinstall the image file.
STATUS_INSUFFICIENT_LOGON_INFO0xC0000250There is insufficient account information to log you on.
STATUS_BAD_DLL_ENTRYPOINT0xC0000251{Invalid DLL Entrypoint} The dynamic link library hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly.
STATUS_BAD_SERVICE_ENTRYPOINT0xC0000252{Invalid Service Callback Entrypoint} The hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly.
STATUS_LPC_REPLY_LOST0xC0000253The server received the messages but did not send a reply.
STATUS_IP_ADDRESS_CONFLICT10xC0000254There is an IP address conflict with another system on the network
STATUS_IP_ADDRESS_CONFLICT20xC0000255There is an IP address conflict with another system on the network
STATUS_REGISTRY_QUOTA_LIMIT0xC0000256{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
STATUS_PATH_NOT_COVERED0xC0000257The contacted server does not support the indicated part of the DFS namespace.
STATUS_NO_CALLBACK_ACTIVE0xC0000258A callback return system service cannot be executed when no callback is active.
STATUS_LICENSE_QUOTA_EXCEEDED0xC0000259The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
STATUS_PWD_TOO_SHORT0xC000025AThe password provided is too short to meet the policy of your user account. Please choose a longer password.
STATUS_PWD_TOO_RECENT0xC000025BThe policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.
STATUS_PWD_HISTORY_CONFLICT0xC000025CYou have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used.
STATUS_PLUGPLAY_NO_DEVICE0xC000025EYou have attempted to load a legacy device driver while its device instance had been disabled.
STATUS_UNSUPPORTED_COMPRESSION0xC000025FThe specified compression format is unsupported.
STATUS_INVALID_HW_PROFILE0xC0000260The specified hardware profile configuration is invalid.
STATUS_DRIVER_ORDINAL_NOT_FOUND0xC0000262{Driver Entry Point Not Found} The hs device driver could not locate the ordinal ld in driver hs.
STATUS_RESOURCE_NOT_OWNED0xC0000264{Application Error} The application attempted to release a resource it did not own. Click OK to terminate the application.
STATUS_TOO_MANY_LINKS0xC0000265An attempt was made to create more links on a file than the file system supports.
STATUS_QUOTA_LIST_INCONSISTENT0xC0000266The specified quota list is internally inconsistent with its descriptor.
STATUS_FILE_IS_OFFLINE0xC0000267The specified file has been relocated to offline storage.
STATUS_EVALUATION_EXPIRATION0xC0000268{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.
STATUS_ILLEGAL_DLL_RELOCATION0xC0000269{Illegal System DLL Relocation} The system DLL hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
STATUS_LICENSE_VIOLATION0xC000026A{License Violation} The system has detected tampering with your registered product type. This is a violation of your software license. Tampering with product type is not permitted.
STATUS_DLL_INIT_FAILED_LOGOFF0xC000026B{DLL Initialization Failed} The application failed to initialize because the window station is shutting down.
STATUS_DRIVER_UNABLE_TO_LOAD0xC000026C{Unable to Load Device Driver} hs device driver could not be loaded. Error Status was 0xx
STATUS_DFS_UNAVAILABLE0xC000026DDFS is unavailable on the contacted server.
STATUS_VOLUME_DISMOUNTED0xC000026EAn operation was attempted to a volume after it was dismounted.
STATUS_WX86_INTERNAL_ERROR0xC000026FAn internal error occurred in the Win32 x86 emulation subsystem.
STATUS_WX86_FLOAT_STACK_CHECK0xC0000270Win32 x86 emulation subsystem Floating-point stack check.
STATUS_VALIDATE_CONTINUE0xC0000271The validation process needs to continue on to the next step.
STATUS_NO_MATCH0xC0000272There was no match for the specified key in the index.
STATUS_NO_MORE_MATCHES0xC0000273There are no more matches for the current index enumeration.
STATUS_NOT_A_REPARSE_POINT0xC0000275The NTFS file or directory is not a reparse point.
STATUS_IO_REPARSE_TAG_INVALID0xC0000276The Windows I/O reparse tag passed for the NTFS reparse point is invalid.
STATUS_IO_REPARSE_TAG_MISMATCH0xC0000277The Windows I/O reparse tag does not match the one present in the NTFS reparse point.
STATUS_IO_REPARSE_DATA_INVALID0xC0000278The user data passed for the NTFS reparse point is invalid.
STATUS_PWD_TOO_LONG0xC000027AThe password provided is too long to meet the policy of your user account. Please choose a shorter password.
STATUS_STOWED_EXCEPTION0xC000027BAn application-internal exception has occurred.
STATUS_RANGE_LIST_CONFLICT0xC0000282The range could not be added to the range list because of a conflict.
STATUS_SOURCE_ELEMENT_EMPTY0xC0000283The specified medium changer source element contains no media.
STATUS_DESTINATION_ELEMENT_FULL0xC0000284The specified medium changer destination element already contains media.
STATUS_ILLEGAL_ELEMENT_ADDRESS0xC0000285The specified medium changer element does not exist.
STATUS_MAGAZINE_NOT_PRESENT0xC0000286The specified element is contained within a magazine that is no longer present.
STATUS_REINITIALIZATION_NEEDED0xC0000287The device requires reinitialization due to hardware errors.
STATUS_DEVICE_REQUIRES_CLEANING0x80000288The device has indicated that cleaning is necessary.
STATUS_DEVICE_DOOR_OPEN0x80000289The device has indicated that its door is open. Further operations require it closed and secured.
STATUS_ENCRYPTION_FAILED0xC000028AThe file encryption attempt failed.
STATUS_DECRYPTION_FAILED0xC000028BThe file decryption attempt failed.
STATUS_RANGE_NOT_FOUND0xC000028CThe specified range could not be found in the range list.
STATUS_NO_RECOVERY_POLICY0xC000028DThere is no encryption recovery policy configured for this system.
STATUS_NO_EFS0xC000028EThe required encryption driver is not loaded for this system.
STATUS_WRONG_EFS0xC000028FThe file was encrypted with a different encryption driver than is currently loaded.
STATUS_NO_USER_KEYS0xC0000290There are no EFS keys defined for the user.
STATUS_FILE_NOT_ENCRYPTED0xC0000291The specified file is not encrypted.
STATUS_NOT_EXPORT_FORMAT0xC0000292The specified file is not in the defined EFS export format.
STATUS_FILE_ENCRYPTED0xC0000293The specified file is encrypted and the user does not have the ability to decrypt it.
STATUS_WAKE_SYSTEM0x40000294The system has awoken
STATUS_WMI_GUID_NOT_FOUND0xC0000295The guid passed was not recognized as valid by a WMI data provider.
STATUS_WMI_INSTANCE_NOT_FOUND0xC0000296The instance name passed was not recognized as valid by a WMI data provider.
STATUS_WMI_ITEMID_NOT_FOUND0xC0000297The data item id passed was not recognized as valid by a WMI data provider.
STATUS_WMI_TRY_AGAIN0xC0000298The WMI request could not be completed and should be retried.
STATUS_SHARED_POLICY0xC0000299The policy object is shared and can only be modified at the root
STATUS_POLICY_OBJECT_NOT_FOUND0xC000029AThe policy object does not exist when it should
STATUS_POLICY_ONLY_IN_DS0xC000029BThe requested policy information only lives in the Ds
STATUS_VOLUME_NOT_UPGRADED0xC000029CThe volume must be upgraded to enable this feature
STATUS_NO_TRACKING_SERVICE0xC000029FThe tracking (workstation) service is not running.
STATUS_SERVER_SID_MISMATCH0xC00002A0The server process is running under a SID different than that required by client.
STATUS_DS_NO_ATTRIBUTE_OR_VALUE0xC00002A1The specified directory service attribute or value does not exist.
STATUS_DS_BUSY0xC00002A5The directory service is busy.
STATUS_DS_UNAVAILABLE0xC00002A6The directory service is not available.
STATUS_DS_NO_RIDS_ALLOCATED0xC00002A7The directory service was unable to allocate a relative identifier.
STATUS_DS_NO_MORE_RIDS0xC00002A8The directory service has exhausted the pool of relative identifiers.
STATUS_DS_INCORRECT_ROLE_OWNER0xC00002A9The requested operation could not be performed because the directory service is not the master for that type of operation.
STATUS_DS_RIDMGR_INIT_ERROR0xC00002AAThe directory service was unable to initialize the subsystem that allocates relative identifiers.
STATUS_DS_OBJ_CLASS_VIOLATION0xC00002ABThe requested operation did not satisfy one or more constraints associated with the class of the object.
STATUS_DS_CANT_ON_NON_LEAF0xC00002ACThe directory service can perform the requested operation only on a leaf object.
STATUS_DS_CANT_ON_RDN0xC00002ADThe directory service cannot perform the requested operation on the Relatively Defined Name (RDN) attribute of an object.
STATUS_DS_CANT_MOD_OBJ_CLASS0xC00002AEThe directory service detected an attempt to modify the object class of an object.
STATUS_DS_CROSS_DOM_MOVE_FAILED0xC00002AFAn error occurred while performing a cross domain move operation.
STATUS_DS_GC_NOT_AVAILABLE0xC00002B0Unable to Contact the Global Catalog Server.
STATUS_CANT_ENABLE_DENY_ONLY0xC00002B3A group marked use for deny only cannot be enabled.
STATUS_FLOAT_MULTIPLE_FAULTS0xC00002B4{EXCEPTION} Multiple floating point faults.
STATUS_FLOAT_MULTIPLE_TRAPS0xC00002B5{EXCEPTION} Multiple floating point traps.
STATUS_DEVICE_REMOVED0xC00002B6The device has been removed.
STATUS_JOURNAL_NOT_ACTIVE0xC00002B8The volume change journal is not active.
STATUS_NOINTERFACE0xC00002B9The requested interface is not supported.
STATUS_DS_RIDMGR_DISABLED0xC00002BAThe directory service detected the subsystem that allocates relative identifiers is disabled. This can occur as a protective mechanism when the system determines a significant portion of relative identifiers (RIDs) have been exhausted. Please see http://go.microsoft.com/fwlink/?LinkId=228610 for recommended diagnostic steps and the procedure to re-enable account creation.
STATUS_DS_ADMIN_LIMIT_EXCEEDED0xC00002C1A directory service resource limit has been exceeded.
STATUS_DRIVER_FAILED_SLEEP0xC00002C2{System Standby Failed} The driver hs does not support standby mode. Updating this driver may allow the system to go to standby mode.
STATUS_WMI_READ_ONLY0xC00002C6The WMI data item or data block is read only.
STATUS_WMI_SET_FAILURE0xC00002C7The WMI data item or data block could not be changed.
STATUS_COMMITMENT_MINIMUM0xC00002C8{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help.
STATUS_REG_NAT_CONSUMPTION0xC00002C9{EXCEPTION} Register NaT consumption faults. A NaT value is consumed on a non speculative instruction.
STATUS_TRANSPORT_FULL0xC00002CAThe medium changer's transport element contains media, which is causing the operation to fail.
STATUS_DS_SAM_INIT_FAILURE0xC00002CBSecurity Accounts Manager initialization failed because of the following error: hs Error Status: 0xx. Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.
STATUS_ONLY_IF_CONNECTED0xC00002CCThis operation is supported only when you are connected to the server.
STATUS_PNP_RESTART_ENUMERATION0xC00002CEA device was removed so enumeration must be restarted.
STATUS_JOURNAL_ENTRY_DELETED0xC00002CFThe journal entry has been deleted from the journal.
STATUS_PNP_REBOOT_REQUIRED0xC00002D2Device will not start without a reboot.
STATUS_POWER_STATE_INVALID0xC00002D3Current device power state cannot support this request.
STATUS_DS_INVALID_GROUP_TYPE0xC00002D4The specified group type is invalid.
STATUS_DS_HAVE_PRIMARY_MEMBERS0xC00002DCCannot change to security disabled group because of having primary members in this group.
STATUS_WMI_NOT_SUPPORTED0xC00002DDThe WMI operation is not supported by the data block or method.
STATUS_INSUFFICIENT_POWER0xC00002DEThere is not enough power to complete the requested operation.
STATUS_SAM_NEED_BOOTKEY_FLOPPY0xC00002E0Security Account Manager needs to get the boot key from floppy disk.
STATUS_DS_CANT_START0xC00002E1Directory Service cannot start.
STATUS_DS_INIT_FAILURE0xC00002E2Directory Services could not start because of the following error: hs Error Status: 0xx. Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.
STATUS_SAM_INIT_FAILURE0xC00002E3Security Accounts Manager initialization failed because of the following error: hs Error Status: 0xx. Please click OK to shutdown this system and reboot into Safe Mode, check the event log for more detailed information.
STATUS_DS_GC_REQUIRED0xC00002E4The requested operation can be performed only on a global catalog server.
STATUS_MULTIPLE_FAULT_VIOLATION0xC00002E8STATUS_MULTIPLE_FAULT_VIOLATION
STATUS_CANNOT_MAKE0xC00002EAThe directory or file cannot be created.
STATUS_SYSTEM_SHUTDOWN0xC00002EBThe system is in the process of shutting down.
STATUS_DS_INIT_FAILURE_CONSOLE0xC00002ECDirectory Services could not start because of the following error: hs Error Status: 0xx. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.
STATUS_NO_TGT_REPLY0xC00002EFThe client is trying to negotiate a context and the server requires user-to-user but didn't send a TGT reply.
STATUS_OBJECTID_NOT_FOUND0xC00002F0An object ID was not found in the file.
STATUS_NO_IP_ADDRESSES0xC00002F1Unable to accomplish the requested task because the local machine does not have any IP addresses.
STATUS_WRONG_CREDENTIAL_HANDLE0xC00002F2The supplied credential handle does not match the credential associated with the security context.
STATUS_CRYPTO_SYSTEM_INVALID0xC00002F3The crypto system or checksum function is invalid because a required function is unavailable.
STATUS_MAX_REFERRALS_EXCEEDED0xC00002F4The number of maximum ticket referrals has been exceeded.
STATUS_MUST_BE_KDC0xC00002F5The local machine must be a Kerberos KDC (domain controller) and it is not.
STATUS_TOO_MANY_PRINCIPALS0xC00002F7The KDC reply contained more than one principal name.
STATUS_NO_PA_DATA0xC00002F8Expected to find PA data for a hint of what etype to use, but it was not found.
STATUS_PKINIT_NAME_MISMATCH0xC00002F9The client certificate does not contain a valid UPN, or does not match the client name in the logon request. Please contact your administrator.
STATUS_SMARTCARD_LOGON_REQUIRED0xC00002FASmartcard logon is required and was not used.
STATUS_KDC_INVALID_REQUEST0xC00002FBAn invalid request was sent to the KDC.
STATUS_KDC_UNABLE_TO_REFER0xC00002FCThe KDC was unable to generate a referral for the service requested.
STATUS_KDC_UNKNOWN_ETYPE0xC00002FDThe encryption type requested is not supported by the KDC.
STATUS_SHUTDOWN_IN_PROGRESS0xC00002FEA system shutdown is in progress.
STATUS_NOT_SUPPORTED_ON_SBS0xC0000300This operation is not supported on a computer running Windows Server 2003 for Small Business Server
STATUS_WMI_GUID_DISCONNECTED0xC0000301The WMI GUID is no longer available
STATUS_WMI_ALREADY_DISABLED0xC0000302Collection or events for the WMI GUID is already disabled.
STATUS_WMI_ALREADY_ENABLED0xC0000303Collection or events for the WMI GUID is already enabled.
STATUS_MFT_TOO_FRAGMENTED0xC0000304The Master File Table on the volume is too fragmented to complete this operation.
STATUS_COPY_PROTECTION_FAILURE0xC0000305Copy protection failure.
STATUS_CSS_KEY_NOT_PRESENT0xC0000307Copy protection error - The given sector does not contain a valid key.
STATUS_CSS_KEY_NOT_ESTABLISHED0xC0000308Copy protection error - DVD session key not established.
STATUS_CSS_SCRAMBLED_SECTOR0xC0000309Copy protection error - The read failed because the sector is encrypted.
STATUS_CSS_REGION_MISMATCH0xC000030ACopy protection error - The given DVD's region does not correspond to the region setting of the drive.
STATUS_CSS_RESETS_EXHAUSTED0xC000030BCopy protection error - The drive's region setting may be permanent.
STATUS_PASSWORD_CHANGE_REQUIRED0xC000030CEAS policy requires that the user change their password before this operation can be performed.
STATUS_PKINIT_FAILURE0xC0000320The Kerberos protocol encountered an error while validating the KDC certificate during smartcard Logon. There is more information in the system event log.
STATUS_NO_KERB_KEY0xC0000322The target server does not have acceptable Kerberos credentials.
STATUS_HOST_DOWN0xC0000350The transport determined that the remote system is down.
STATUS_UNSUPPORTED_PREAUTH0xC0000351An unsupported preauthentication mechanism was presented to the Kerberos package.
STATUS_EFS_ALG_BLOB_TOO_BIG0xC0000352The encryption algorithm used on the source file needs a bigger key buffer than the one used on the destination file.
STATUS_PORT_NOT_SET0xC0000353An attempt to remove a process's DebugPort was made, but a port was not already associated with the process.
STATUS_DEBUGGER_INACTIVE0xC0000354Debugger Inactive: Windows may have been started without kernel debugging enabled.
STATUS_DS_VERSION_CHECK_FAILURE0xC0000355This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller.
STATUS_AUDITING_DISABLED0xC0000356The specified event is currently not being audited.
STATUS_PRENT4_MACHINE_ACCOUNT0xC0000357The machine account was created pre-NT4. The account needs to be recreated.
STATUS_INVALID_IMAGE_WIN_320xC0000359The specified image file did not have the correct format, it appears to be a 32-bit Windows image.
STATUS_INVALID_IMAGE_WIN_640xC000035AThe specified image file did not have the correct format, it appears to be a 64-bit Windows image.
STATUS_BAD_BINDINGS0xC000035BClient's supplied SSPI channel bindings were incorrect.
STATUS_NETWORK_SESSION_EXPIRED0xC000035CThe client's session has expired, so the client must reauthenticate to continue accessing the remote resources.
STATUS_APPHELP_BLOCK0xC000035DAppHelp dialog canceled thus preventing the application from starting.
STATUS_ALL_SIDS_FILTERED0xC000035EThe SID filtering operation removed all SIDs.
STATUS_NOT_SAFE_MODE_DRIVER0xC000035FThe driver was not loaded because the system is booting into safe mode.
STATUS_FAILED_DRIVER_ENTRY0xC0000365The driver was not loaded because it failed its initialization call.
STATUS_DEVICE_ENUMERATION_ERROR0xC0000366The "hs" encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection.
STATUS_MOUNT_POINT_NOT_RESOLVED0xC0000368The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached.
STATUS_MCA_OCCURED0xC000036AA Machine Check Error has occurred. Please check the system eventlog for additional information.
STATUS_SYSTEM_HIVE_TOO_LARGE0xC000036ESystem hive size has exceeded its limit.
STATUS_DS_SHUTTING_DOWN0x40000370The Directory Service is shutting down.
STATUS_NO_SECRETS0xC0000371The local account store does not contain secret material for the specified account.
STATUS_FAILED_STACK_SWITCH0xC0000373The system was not able to allocate enough memory to perform a stack switch.
STATUS_HEAP_CORRUPTION0xC0000374A heap has been corrupted.
STATUS_SMARTCARD_WRONG_PIN0xC0000380An incorrect PIN was presented to the smart card
STATUS_SMARTCARD_CARD_BLOCKED0xC0000381The smart card is blocked
STATUS_SMARTCARD_NO_CARD0xC0000383No smart card available
STATUS_SMARTCARD_NO_CERTIFICATE0xC0000385The requested certificate does not exist on the smart card
STATUS_SMARTCARD_NO_KEYSET0xC0000386The requested keyset does not exist
STATUS_SMARTCARD_IO_ERROR0xC0000387A communication error with the smart card has been detected.
STATUS_DOWNGRADE_DETECTED0xC0000388The system cannot contact a domain controller to service the authentication request. Please try again later.
STATUS_SMARTCARD_CERT_REVOKED0xC0000389The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log.
STATUS_ISSUING_CA_UNTRUSTED0xC000038AAn untrusted certificate authority was detected while processing the smartcard certificate used for authentication. Please contact your system administrator.
STATUS_REVOCATION_OFFLINE_C0xC000038BThe revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator.
STATUS_PKINIT_CLIENT_FAILURE0xC000038CThe smartcard certificate used for authentication was not trusted. Please contact your system administrator.
STATUS_SMARTCARD_CERT_EXPIRED0xC000038DThe smartcard certificate used for authentication has expired. Please contact your system administrator.
STATUS_SMARTCARD_SILENT_CONTEXT0xC000038FThe smartcard provider could not perform the action since the context was acquired as silent.
STATUS_DS_NAME_NOT_UNIQUE0xC0000404The requested name already exists as a unique identifier.
STATUS_DS_DUPLICATE_ID_FOUND0xC0000405The requested object has a non-unique identifier and cannot be retrieved.
STATUS_USER2USER_REQUIRED0xC0000408Kerberos sub-protocol User2User is required.
STATUS_STACK_BUFFER_OVERRUN0xC0000409The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
STATUS_NO_S4U_PROT_SUPPORT0xC000040AThe Kerberos subsystem encountered an error. A service for user protocol request was made against a domain controller which does not support service for user.
STATUS_REVOCATION_OFFLINE_KDC0xC000040CThe revocation status of the domain controller certificate used for smartcard authentication could not be determined. There is additional information in the system event log. Please contact your system administrator.
STATUS_ISSUING_CA_UNTRUSTED_KDC0xC000040DAn untrusted certificate authority was detected while processing the domain controller certificate used for authentication. There is additional information in the system event log. Please contact your system administrator.
STATUS_KDC_CERT_EXPIRED0xC000040EThe domain controller certificate used for smartcard logon has expired. Please contact your system administrator with the contents of your system event log.
STATUS_KDC_CERT_REVOKED0xC000040FThe domain controller certificate used for smartcard logon has been revoked. Please contact your system administrator with the contents of your system event log.
STATUS_PARAMETER_QUOTA_EXCEEDED0xC0000410Data present in one of the parameters is more than the function can operate on.
STATUS_HIBERNATION_FAILURE0xC0000411The system has failed to hibernate (The error code is hs). Hibernation will be disabled until the system is restarted.
STATUS_DELAY_LOAD_FAILED0xC0000412An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.
STATUS_VDM_DISALLOWED0xC0000414hs is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.
STATUS_NTLM_BLOCKED0xC0000418The authentication failed since NTLM was blocked.
STATUS_ASSERTION_FAILURE0xC0000420An assertion failure has occurred.
STATUS_VERIFIER_STOP0xC0000421Application verifier has found an error in the current process.
STATUS_CALLBACK_POP_STACK0xC0000423An exception has occurred in a user mode callback and the kernel callback frame should be removed.
STATUS_HIVE_UNLOADED0xC0000425Illegal operation attempted on a registry key which has already been unloaded.
STATUS_COMPRESSION_DISABLED0xC0000426Compression is disabled for this volume.
STATUS_FILE_SYSTEM_LIMITATION0xC0000427The requested operation could not be completed due to a file system limitation
STATUS_INVALID_IMAGE_HASH0xC0000428Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
STATUS_NOT_CAPABLE0xC0000429The implementation is not capable of performing the request.
STATUS_REQUEST_OUT_OF_SEQUENCE0xC000042AThe requested operation is out of order with respect to other operations.
STATUS_IMPLEMENTATION_LIMIT0xC000042BAn operation attempted to exceed an implementation-defined limit.
STATUS_ELEVATION_REQUIRED0xC000042CThe requested operation requires elevation.
STATUS_NO_SECURITY_CONTEXT0xC000042DThe required security context does not exist.
STATUS_PKU2U_CERT_FAILURE0xC000042FThe PKU2U protocol encountered an error while attempting to utilize the associated certificates.
STATUS_BEYOND_VDL0xC0000432The operation was attempted beyond the valid data length of the file.
STATUS_PTE_CHANGED0xC0000434The page fault mappings changed in the middle of processing a fault so the operation must be retried.
STATUS_PURGE_FAILED0xC0000435The attempt to purge this file from memory failed to purge some or all the data from memory.
STATUS_INVALID_LABEL0xC0000446Indicates a particular Security ID may not be assigned as the label of an object.
STATUS_AMBIGUOUS_SYSTEM_DEVICE0xC0000451The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria.
STATUS_SYSTEM_DEVICE_NOT_FOUND0xC0000452The requested system device cannot be found.
STATUS_RESTART_BOOT_APPLICATION0xC0000453This boot application must be restarted.
STATUS_INVALID_SESSION0xC0000455The specified session is invalid.
STATUS_THREAD_NOT_IN_SESSION0xC0000457The specified thread is not in a session.
STATUS_INVALID_WEIGHT0xC0000458The specified weight is invalid.
STATUS_REQUEST_PAUSED0xC0000459The operation was paused.
STATUS_NO_RANGES_PROCESSED0xC0000460No ranges for the specified operation were able to be processed.
STATUS_DISK_RESOURCES_EXHAUSTED0xC0000461The physical resources of this disk have been exhausted.
STATUS_NEEDS_REMEDIATION0xC0000462The application cannot be started. Try reinstalling the application to fix the problem.
STATUS_DEVICE_UNREACHABLE0xC0000464{Source/Destination device unreachable} The device is unreachable.
STATUS_INVALID_TOKEN0xC0000465{Invalid Proxy Data Token} The token representing the data is invalid.
STATUS_SERVER_UNAVAILABLE0xC0000466The file server is temporarily unavailable.
STATUS_FILE_NOT_AVAILABLE0xC0000467The file is temporarily unavailable.
STATUS_PACKAGE_UPDATING0xC0000469The application cannot be started because it is currently updating.
STATUS_NOT_READ_FROM_COPY0xC000046AThe specified copy of the requested data could not be read.
STATUS_FT_WRITE_FAILURE0xC000046BThe specified data could not be written to any of the copies.
STATUS_FT_DI_SCAN_REQUIRED0xC000046COne or more copies of data on this device may be out of sync. No writes may be performed until a data integrity scan is completed.
STATUS_DATA_CHECKSUM_ERROR0xC0000470A data integrity checksum error occurred. Data in the file stream is corrupt.
STATUS_INVALID_OFFSET_ALIGNMENT0xC0000474{Alignment Violation} The command specified a data offset that does not align to the device's granularity/alignment.
STATUS_OPERATION_IN_PROGRESS0xC0000476{Operation In Progress} An operation is currently in progress with the device.
STATUS_SCRUB_DATA_DISABLED0xC0000478Scrub is disabled on the specified file.
STATUS_NOT_REDUNDANT_STORAGE0xC0000479The storage device does not provide redundancy.
STATUS_DIRECTORY_NOT_SUPPORTED0xC000047CAn operation is not supported on a directory.
STATUS_IO_OPERATION_TIMEOUT0xC000047D{IO Operation Timeout} The specified I/O operation failed to complete within the expected time period.
STATUS_SYSTEM_NEEDS_REMEDIATION0xC000047EAn error in a system binary was detected. Try refreshing the PC to fix the problem.
STATUS_SHARE_UNAVAILABLE0xC0000480The share is temporarily unavailable.
STATUS_INVALID_TASK_NAME0xC0000500The specified task name is invalid.
STATUS_INVALID_TASK_INDEX0xC0000501The specified task index is invalid.
STATUS_THREAD_ALREADY_IN_TASK0xC0000502The specified thread is already joining a task.
STATUS_CALLBACK_BYPASS0xC0000503A callback has requested to bypass native code.
STATUS_UNDEFINED_SCOPE0xC0000504The Central Access Policy specified is not defined on the target machine.
STATUS_INVALID_CAP0xC0000505The Central Access Policy obtained from Active Directory is invalid.
STATUS_NOT_GUI_PROCESS0xC0000506Unable to finish the requested operation because the specified process is not a GUI process.
STATUS_FAIL_FAST_EXCEPTION0xC0000602{Fail Fast Exception} A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately.
STATUS_IMAGE_CERT_REVOKED0xC0000603Windows cannot verify the digital signature for this file. The signing certificate for this file has been revoked.
STATUS_PORT_CLOSED0xC0000700The ALPC port is closed.
STATUS_MESSAGE_LOST0xC0000701The ALPC message requested is no longer available.
STATUS_INVALID_MESSAGE0xC0000702The ALPC message supplied is invalid.
STATUS_REQUEST_CANCELED0xC0000703The ALPC message has been canceled.
STATUS_RECURSIVE_DISPATCH0xC0000704Invalid recursive dispatch attempt.
STATUS_LPC_REQUESTS_NOT_ALLOWED0xC0000707The ALPC port does not accept new request messages.
STATUS_RESOURCE_IN_USE0xC0000708The resource requested is already in use.
STATUS_HARDWARE_MEMORY_ERROR0xC0000709The hardware has reported an uncorrectable memory error.
STATUS_PROCESS_IS_PROTECTED0xC0000712Either the target process, or the target thread's containing process, is a protected process.
STATUS_MCA_EXCEPTION0xC0000713A Thread is getting dispatched with MCA EXCEPTION because of MCA.
STATUS_SYMLINK_CLASS_DISABLED0xC0000715The symbolic link cannot be followed because its type is disabled.
STATUS_NO_UNICODE_TRANSLATION0xC0000717No mapping for the Unicode character exists in the target multi-byte code page.
STATUS_ALREADY_REGISTERED0xC0000718The provided callback is already registered.
STATUS_CONTEXT_MISMATCH0xC0000719The provided context did not match the target.
STATUS_INVALID_THREAD0xC000071CAn invalid thread, handle p, is specified for this operation. Possibly, a threadpool worker thread was specified.
STATUS_CALLBACK_RETURNED_LANG0xC000071FA threadpool worker thread enter a callback, which left with preferred languages set. This is unexpected, indicating that the callback missed clearing them.
STATUS_DISK_REPAIR_DISABLED0xC0000800The attempted operation required self healing to be enabled.
STATUS_DISK_QUOTA_EXCEEDED0xC0000802The requested file operation failed because the storage quota was exceeded. To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.
STATUS_DATA_LOST_REPAIR0x80000803Windows discovered a corruption in the file "hs". This file has now been repaired. Please check if any data in the file was lost because of the corruption.
STATUS_CONTENT_BLOCKED0xC0000804The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator.
STATUS_BAD_CLUSTERS0xC0000805The operation could not be completed due to bad clusters on disk.
STATUS_VOLUME_DIRTY0xC0000806The operation could not be completed because the volume is dirty. Please run chkdsk and try again.
STATUS_DISK_REPAIR_REDIRECTED0x40000807The volume repair could not be performed while it is online. Please schedule to take the volume offline so that it can be repaired.
STATUS_DISK_REPAIR_UNSUCCESSFUL0xC0000808The volume repair was not successful.
STATUS_CORRUPT_LOG_OVERFULL0xC0000809One of the volume corruption logs is full. Further corruptions that may be detected won't be logged.
STATUS_CORRUPT_LOG_CORRUPTED0xC000080AOne of the volume corruption logs is internally corrupted and needs to be recreated. The volume may contain undetected corruptions and must be scanned.
STATUS_CORRUPT_LOG_UNAVAILABLE0xC000080BOne of the volume corruption logs is unavailable for being operated on.
STATUS_CORRUPT_LOG_DELETED_FULL0xC000080COne of the volume corruption logs was deleted while still having corruption records in them. The volume contains detected corruptions and must be scanned.
STATUS_CORRUPT_LOG_CLEARED0xC000080DOne of the volume corruption logs was cleared by chkdsk and no longer contains real corruptions.
STATUS_ORPHAN_NAME_EXHAUSTED0xC000080EOrphaned files exist on the volume but could not be recovered because no more new names could be created in the recovery directory. Files must be moved from the recovery directory.
STATUS_FILE_CHECKED_OUT0xC0000901This file is checked out or locked for editing by another user.
STATUS_CHECKOUT_REQUIRED0xC0000902The file must be checked out before saving changes.
STATUS_BAD_FILE_TYPE0xC0000903The file type being saved or retrieved has been blocked.
STATUS_FILE_TOO_LARGE0xC0000904The file size exceeds the limit allowed and cannot be saved.
STATUS_FORMS_AUTH_REQUIRED0xC0000905Access Denied. Before opening files in this location, you must first browse to the web site and select the option to login automatically.
STATUS_VIRUS_INFECTED0xC0000906Operation did not complete successfully because the file contains a virus or potentially unwanted software.
STATUS_VIRUS_DELETED0xC0000907This file contains a virus or potentially unwanted software and cannot be opened. Due to the nature of this virus or potentially unwanted software, the file has been removed from this location.
STATUS_BAD_MCFG_TABLE0xC0000908The resources required for this device conflict with the MCFG table.
STATUS_CANNOT_BREAK_OPLOCK0xC0000909The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
STATUS_BAD_KEY0xC000090ABad key.
STATUS_BAD_DATA0xC000090BBad data.
STATUS_NO_KEY0xC000090CKey does not exist.
STATUS_FILE_HANDLE_REVOKED0xC0000910Access to the specified file handle has been revoked.
STATUS_WOW_ASSERTION0xC0009898WOW Assertion Error.
STATUS_INVALID_SIGNATURE0xC000A000The cryptographic signature is invalid.
STATUS_HMAC_NOT_SUPPORTED0xC000A001The cryptographic provider does not support HMAC.
STATUS_AUTH_TAG_MISMATCH0xC000A002The computed authentication tag did not match the input authentication tag.
STATUS_INVALID_STATE_TRANSITION0xC000A003The requested state transition is invalid and cannot be performed.
STATUS_INVALID_PEP_INFO_VERSION0xC000A005The supplied PEP information version is invalid.
STATUS_IPSEC_QUEUE_OVERFLOW0xC000A010The IPSEC queue overflowed.
STATUS_ND_QUEUE_OVERFLOW0xC000A011The neighbor discovery queue overflowed.
STATUS_HOPLIMIT_EXCEEDED0xC000A012An ICMP hop limit exceeded error was received.
STATUS_PROTOCOL_NOT_SUPPORTED0xC000A013The protocol is not installed on the local machine.
STATUS_FASTPATH_REJECTED0xC000A014An operation or data has been rejected while on the network fast path.
STATUS_XML_PARSE_ERROR0xC000A083Windows was unable to parse the requested XML data.
STATUS_XMLDSIG_ERROR0xC000A084An error was encountered while processing an XML digital signature.
STATUS_WRONG_COMPARTMENT0xC000A085Indicates that the caller made the connection request in the wrong routing compartment.
STATUS_AUTHIP_FAILURE0xC000A086Indicates that there was an AuthIP failure when attempting to connect to the remote host.
STATUS_DS_OID_NOT_FOUND0xC000A088The specified OID cannot be found.
STATUS_INCORRECT_ACCOUNT_TYPE0xC000A089The system is not authoritative for the specified account and therefore cannot complete the operation. Please retry the operation using the provider associated with this account. If this is an online provider please use the provider's online site.
STATUS_HASH_NOT_SUPPORTED0xC000A100Hash generation for the specified version and hash type is not enabled on server.
STATUS_HASH_NOT_PRESENT0xC000A101The hash requests is not present or not up to date with the current file contents.
STATUS_GPIO_OPERATION_DENIED0xC000A125The requested operation is not suppported for the specified handle.
STATUS_CANNOT_SWITCH_RUNLEVEL0xC000A141The requested run level switch cannot be completed successfully since one or more services refused to stop or restart.
STATUS_INVALID_RUNLEVEL_SETTING0xC000A142The service has an invalid run level setting. The run level for a service must not be higher than the run level of its dependent services.
STATUS_RUNLEVEL_SWITCH_TIMEOUT0xC000A143The requested run level switch cannot be completed successfully since one or more services will not stop or restart within the specified timeout.
STATUS_NOT_APPCONTAINER0xC000A200This operation is only valid in the context of an app container.
STATUS_APP_DATA_NOT_FOUND0xC000A281Fast Cache data not found.
STATUS_APP_DATA_EXPIRED0xC000A282Fast Cache data expired.
STATUS_APP_DATA_CORRUPT0xC000A283Fast Cache data corrupt.
STATUS_APP_DATA_LIMIT_EXCEEDED0xC000A284Fast Cache data has exceeded its max size and cannot be updated.
STATUS_APP_DATA_REBOOT_REQUIRED0xC000A285Fast Cache has been ReArmed and requires a reboot until it can be updated.
DBG_NO_STATE_CHANGE0xC0010001Debugger did not perform a state change.
DBG_APP_NOT_IDLE0xC0010002Debugger has found the application is not idle.
RPC_NT_INVALID_STRING_BINDING0xC0020001The string binding is invalid.
RPC_NT_WRONG_KIND_OF_BINDING0xC0020002The binding handle is not the correct type.
RPC_NT_INVALID_BINDING0xC0020003The binding handle is invalid.
RPC_NT_PROTSEQ_NOT_SUPPORTED0xC0020004The RPC protocol sequence is not supported.
RPC_NT_INVALID_RPC_PROTSEQ0xC0020005The RPC protocol sequence is invalid.
RPC_NT_INVALID_STRING_UUID0xC0020006The string UUID is invalid.
RPC_NT_INVALID_ENDPOINT_FORMAT0xC0020007The endpoint format is invalid.
RPC_NT_INVALID_NET_ADDR0xC0020008The network address is invalid.
RPC_NT_NO_ENDPOINT_FOUND0xC0020009No endpoint was found.
RPC_NT_INVALID_TIMEOUT0xC002000AThe timeout value is invalid.
RPC_NT_OBJECT_NOT_FOUND0xC002000BThe object UUID was not found.
RPC_NT_ALREADY_REGISTERED0xC002000CThe object UUID has already been registered.
RPC_NT_TYPE_ALREADY_REGISTERED0xC002000DThe type UUID has already been registered.
RPC_NT_ALREADY_LISTENING0xC002000EThe RPC server is already listening.
RPC_NT_NO_PROTSEQS_REGISTERED0xC002000FNo protocol sequences have been registered.
RPC_NT_NOT_LISTENING0xC0020010The RPC server is not listening.
RPC_NT_UNKNOWN_MGR_TYPE0xC0020011The manager type is unknown.
RPC_NT_UNKNOWN_IF0xC0020012The interface is unknown.
RPC_NT_NO_BINDINGS0xC0020013There are no bindings.
RPC_NT_NO_PROTSEQS0xC0020014There are no protocol sequences.
RPC_NT_CANT_CREATE_ENDPOINT0xC0020015The endpoint cannot be created.
RPC_NT_OUT_OF_RESOURCES0xC0020016Not enough resources are available to complete this operation.
RPC_NT_SERVER_UNAVAILABLE0xC0020017The RPC server is unavailable.
RPC_NT_SERVER_TOO_BUSY0xC0020018The RPC server is too busy to complete this operation.
RPC_NT_INVALID_NETWORK_OPTIONS0xC0020019The network options are invalid.
RPC_NT_NO_CALL_ACTIVE0xC002001AThere are no remote procedure calls active on this thread.
RPC_NT_CALL_FAILED0xC002001BThe remote procedure call failed.
RPC_NT_CALL_FAILED_DNE0xC002001CThe remote procedure call failed and did not execute.
RPC_NT_PROTOCOL_ERROR0xC002001DAn RPC protocol error occurred.
RPC_NT_UNSUPPORTED_TRANS_SYN0xC002001FThe transfer syntax is not supported by the RPC server.
RPC_NT_UNSUPPORTED_TYPE0xC0020021The type UUID is not supported.
RPC_NT_INVALID_TAG0xC0020022The tag is invalid.
RPC_NT_INVALID_BOUND0xC0020023The array bounds are invalid.
RPC_NT_NO_ENTRY_NAME0xC0020024The binding does not contain an entry name.
RPC_NT_INVALID_NAME_SYNTAX0xC0020025The name syntax is invalid.
RPC_NT_UNSUPPORTED_NAME_SYNTAX0xC0020026The name syntax is not supported.
RPC_NT_UUID_NO_ADDRESS0xC0020028No network address is available to use to construct a UUID.
RPC_NT_DUPLICATE_ENDPOINT0xC0020029The endpoint is a duplicate.
RPC_NT_UNKNOWN_AUTHN_TYPE0xC002002AThe authentication type is unknown.
RPC_NT_MAX_CALLS_TOO_SMALL0xC002002BThe maximum number of calls is too small.
RPC_NT_STRING_TOO_LONG0xC002002CThe string is too long.
RPC_NT_PROTSEQ_NOT_FOUND0xC002002DThe RPC protocol sequence was not found.
RPC_NT_PROCNUM_OUT_OF_RANGE0xC002002EThe procedure number is out of range.
RPC_NT_BINDING_HAS_NO_AUTH0xC002002FThe binding does not contain any authentication information.
RPC_NT_UNKNOWN_AUTHN_SERVICE0xC0020030The authentication service is unknown.
RPC_NT_UNKNOWN_AUTHN_LEVEL0xC0020031The authentication level is unknown.
RPC_NT_INVALID_AUTH_IDENTITY0xC0020032The security context is invalid.
RPC_NT_UNKNOWN_AUTHZ_SERVICE0xC0020033The authorization service is unknown.
EPT_NT_INVALID_ENTRY0xC0020034The entry is invalid.
EPT_NT_CANT_PERFORM_OP0xC0020035The operation cannot be performed.
EPT_NT_NOT_REGISTERED0xC0020036There are no more endpoints available from the endpoint mapper.
RPC_NT_NOTHING_TO_EXPORT0xC0020037No interfaces have been exported.
RPC_NT_INCOMPLETE_NAME0xC0020038The entry name is incomplete.
RPC_NT_INVALID_VERS_OPTION0xC0020039The version option is invalid.
RPC_NT_NO_MORE_MEMBERS0xC002003AThere are no more members.
RPC_NT_NOT_ALL_OBJS_UNEXPORTED0xC002003BThere is nothing to unexport.
RPC_NT_INTERFACE_NOT_FOUND0xC002003CThe interface was not found.
RPC_NT_ENTRY_ALREADY_EXISTS0xC002003DThe entry already exists.
RPC_NT_ENTRY_NOT_FOUND0xC002003EThe entry is not found.
RPC_NT_NAME_SERVICE_UNAVAILABLE0xC002003FThe name service is unavailable.
RPC_NT_INVALID_NAF_ID0xC0020040The network address family is invalid.
RPC_NT_CANNOT_SUPPORT0xC0020041The requested operation is not supported.
RPC_NT_NO_CONTEXT_AVAILABLE0xC0020042No security context is available to allow impersonation.
RPC_NT_INTERNAL_ERROR0xC0020043An internal error occurred in RPC.
RPC_NT_ZERO_DIVIDE0xC0020044The RPC server attempted an integer divide by zero.
RPC_NT_ADDRESS_ERROR0xC0020045An addressing error occurred in the RPC server.
RPC_NT_FP_DIV_ZERO0xC0020046A floating point operation at the RPC server caused a divide by zero.
RPC_NT_FP_UNDERFLOW0xC0020047A floating point underflow occurred at the RPC server.
RPC_NT_FP_OVERFLOW0xC0020048A floating point overflow occurred at the RPC server.
RPC_NT_NO_MORE_ENTRIES0xC0030001The list of RPC servers available for auto-handle binding has been exhausted.
RPC_NT_SS_CHAR_TRANS_OPEN_FAIL0xC0030002The file designated by DCERPCCHARTRANS cannot be opened.
RPC_NT_SS_CHAR_TRANS_SHORT_FILE0xC0030003The file containing the character translation table has fewer than 512 bytes.
RPC_NT_SS_IN_NULL_CONTEXT0xC0030004A null context handle is passed as an [in] parameter.
RPC_NT_SS_CONTEXT_MISMATCH0xC0030005The context handle does not match any known context handles.
RPC_NT_SS_CONTEXT_DAMAGED0xC0030006The context handle changed during a call.
RPC_NT_SS_HANDLES_MISMATCH0xC0030007The binding handles passed to a remote procedure call do not match.
RPC_NT_NULL_REF_POINTER0xC0030009A null reference pointer was passed to the stub.
RPC_NT_ENUM_VALUE_OUT_OF_RANGE0xC003000AThe enumeration value is out of range.
RPC_NT_BYTE_COUNT_TOO_SMALL0xC003000BThe byte count is too small.
RPC_NT_BAD_STUB_DATA0xC003000CThe stub received bad data.
RPC_NT_CALL_IN_PROGRESS0xC0020049A remote procedure call is already in progress for this thread.
RPC_NT_NO_MORE_BINDINGS0xC002004AThere are no more bindings.
RPC_NT_GROUP_MEMBER_NOT_FOUND0xC002004BThe group member was not found.
EPT_NT_CANT_CREATE0xC002004CThe endpoint mapper database entry could not be created.
RPC_NT_INVALID_OBJECT0xC002004DThe object UUID is the nil UUID.
RPC_NT_NO_INTERFACES0xC002004FNo interfaces have been registered.
RPC_NT_CALL_CANCELLED0xC0020050The remote procedure call was cancelled.
RPC_NT_BINDING_INCOMPLETE0xC0020051The binding handle does not contain all required information.
RPC_NT_COMM_FAILURE0xC0020052A communications failure occurred during a remote procedure call.
RPC_NT_UNSUPPORTED_AUTHN_LEVEL0xC0020053The requested authentication level is not supported.
RPC_NT_NO_PRINC_NAME0xC0020054No principal name registered.
RPC_NT_NOT_RPC_ERROR0xC0020055The error specified is not a valid Windows RPC error code.
RPC_NT_UUID_LOCAL_ONLY0x40020056A UUID that is valid only on this computer has been allocated.
RPC_NT_SEC_PKG_ERROR0xC0020057A security package specific error occurred.
RPC_NT_NOT_CANCELLED0xC0020058Thread is not cancelled.
RPC_NT_INVALID_ES_ACTION0xC0030059Invalid operation on the encoding/decoding handle.
RPC_NT_WRONG_ES_VERSION0xC003005AIncompatible version of the serializing package.
RPC_NT_WRONG_STUB_VERSION0xC003005BIncompatible version of the RPC stub.
RPC_NT_INVALID_PIPE_OBJECT0xC003005CThe RPC pipe object is invalid or corrupted.
RPC_NT_INVALID_PIPE_OPERATION0xC003005DAn invalid operation was attempted on an RPC pipe object.
RPC_NT_WRONG_PIPE_VERSION0xC003005EUnsupported RPC pipe version.
RPC_NT_PIPE_CLOSED0xC003005FThe RPC pipe object has already been closed.
RPC_NT_PIPE_DISCIPLINE_ERROR0xC0030060The RPC call completed before all pipes were processed.
RPC_NT_PIPE_EMPTY0xC0030061No more data is available from the RPC pipe.
RPC_NT_INVALID_ASYNC_HANDLE0xC0020062Invalid asynchronous remote procedure call handle.
RPC_NT_INVALID_ASYNC_CALL0xC0020063Invalid asynchronous RPC call handle for this operation.
RPC_NT_PROXY_ACCESS_DENIED0xC0020064Access to the HTTP proxy is denied.
RPC_NT_COOKIE_AUTH_FAILED0xC0020065HTTP proxy server rejected the connection because the cookie authentication failed.
RPC_NT_SEND_INCOMPLETE0x400200AFSome data remains to be sent in the request buffer.
STATUS_ACPI_INVALID_OPCODE0xC0140001An attempt was made to run an invalid AML opcode
STATUS_ACPI_STACK_OVERFLOW0xC0140002The AML Interpreter Stack has overflowed
STATUS_ACPI_ASSERT_FAILED0xC0140003An inconsistent state has occurred
STATUS_ACPI_INVALID_INDEX0xC0140004An attempt was made to access an array outside of its bounds
STATUS_ACPI_INVALID_ARGUMENT0xC0140005A required argument was not specified
STATUS_ACPI_FATAL0xC0140006A fatal error has occurred
STATUS_ACPI_INVALID_SUPERNAME0xC0140007An invalid SuperName was specified
STATUS_ACPI_INVALID_ARGTYPE0xC0140008An argument with an incorrect type was specified
STATUS_ACPI_INVALID_OBJTYPE0xC0140009An object with an incorrect type was specified
STATUS_ACPI_INVALID_TARGETTYPE0xC014000AA target with an incorrect type was specified
STATUS_ACPI_ADDRESS_NOT_MAPPED0xC014000CAn address failed to translate
STATUS_ACPI_INVALID_EVENTTYPE0xC014000DAn incorrect event type was specified
STATUS_ACPI_HANDLER_COLLISION0xC014000EA handler for the target already exists
STATUS_ACPI_INVALID_DATA0xC014000FInvalid data for the target was specified
STATUS_ACPI_INVALID_REGION0xC0140010An invalid region for the target was specified
STATUS_ACPI_INVALID_ACCESS_SIZE0xC0140011An attempt was made to access a field outside of the defined range
STATUS_ACPI_ACQUIRE_GLOBAL_LOCK0xC0140012The Global system lock could not be acquired
STATUS_ACPI_ALREADY_INITIALIZED0xC0140013An attempt was made to reinitialize the ACPI subsystem
STATUS_ACPI_NOT_INITIALIZED0xC0140014The ACPI subsystem has not been initialized
STATUS_ACPI_INVALID_MUTEX_LEVEL0xC0140015An incorrect mutex was specified
STATUS_ACPI_MUTEX_NOT_OWNED0xC0140016The mutex is not currently owned
STATUS_ACPI_MUTEX_NOT_OWNER0xC0140017An attempt was made to access the mutex by a process that was not the owner
STATUS_ACPI_RS_ACCESS0xC0140018An error occurred during an access to Region Space
STATUS_ACPI_INVALID_TABLE0xC0140019An attempt was made to use an incorrect table
STATUS_ACPI_REG_HANDLER_FAILED0xC0140020The registration of an ACPI event failed
STATUS_CTX_CDM_CONNECT0x400A0004The Client Drive Mapping Service Has Connected on Terminal Connection.
STATUS_CTX_CDM_DISCONNECT0x400A0005The Client Drive Mapping Service Has Disconnected on Terminal Connection.
STATUS_CTX_CLOSE_PENDING0xC00A0006A close operation is pending on the Terminal Connection.
STATUS_CTX_NO_OUTBUF0xC00A0007There are no free output buffers available.
STATUS_CTX_MODEM_INF_NOT_FOUND0xC00A0008The MODEM.INF file was not found.
STATUS_CTX_RESPONSE_ERROR0xC00A000AThe modem did not accept the command sent to it. Verify the configured modem name matches the attached modem.
STATUS_CTX_MODEM_RESPONSE_BUSY0xC00A000EBusy signal detected at remote site on callback.
STATUS_CTX_MODEM_RESPONSE_VOICE0xC00A000FVoice detected at remote site on callback.
STATUS_CTX_TD_ERROR0xC00A0010Transport driver error
STATUS_CTX_LICENSE_EXPIRED0xC00A0014The system license has expired. Your logon request is denied.
STATUS_CTX_WINSTATION_NOT_FOUND0xC00A0015The specified session cannot be found.
STATUS_CTX_WINSTATION_BUSY0xC00A0017The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.
STATUS_CTX_BAD_VIDEO_MODE0xC00A0018An attempt has been made to connect to a session whose video mode is not supported by the current client.
STATUS_CTX_GRAPHICS_INVALID0xC00A0022The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.
STATUS_CTX_NOT_CONSOLE0xC00A0024The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.
STATUS_CTX_CLIENT_QUERY_TIMEOUT0xC00A0026The client failed to respond to the server connect message.
STATUS_CTX_CONSOLE_DISCONNECT0xC00A0027Disconnecting the console session is not supported.
STATUS_CTX_CONSOLE_CONNECT0xC00A0028Reconnecting a disconnected session to the console is not supported.
STATUS_CTX_SHADOW_DENIED0xC00A002AThe request to control another session remotely was denied.
STATUS_CTX_SHADOW_INVALID0xC00A0030The requested session cannot be controlled remotely. You cannot control your own session, a session that is trying to control your session, a session that has no user logged on, nor control other sessions from the console.
STATUS_CTX_SHADOW_DISABLED0xC00A0031The requested session is not configured to allow remote control.
STATUS_CTX_SHADOW_NOT_RUNNING0xC00A0036Remote control could not be terminated because the specified session is not currently being remotely controlled.
STATUS_CTX_LOGON_DISABLED0xC00A0037Your interactive logon privilege has been disabled. Please contact your system administrator.
STATUS_TS_INCOMPATIBLE_SESSIONS0xC00A0039The target session is incompatible with the current session.
STATUS_TS_VIDEO_SUBSYSTEM_ERROR0xC00A003AWindows can't connect to your session because a problem occurred in the Windows video subsystem. Try connecting again later, or contact the server administrator for assistance.
STATUS_PNP_BAD_MPS_TABLE0xC0040035A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update.
STATUS_PNP_TRANSLATION_FAILED0xC0040036A translator failed to translate resources.
STATUS_IO_REISSUE_AS_CACHED0xC0040039Reissue the given operation as a cached IO operation
STATUS_MUI_FILE_NOT_FOUND0xC00B0001The resource loader failed to find MUI file.
STATUS_MUI_INVALID_FILE0xC00B0002The resource loader failed to load MUI file because the file fail to pass validation.
STATUS_MUI_INVALID_RC_CONFIG0xC00B0003The RC Manifest is corrupted with garbage data or unsupported version or missing required item.
STATUS_MUI_INVALID_LOCALE_NAME0xC00B0004The RC Manifest has invalid culture name.
STATUS_MUI_FILE_NOT_LOADED0xC00B0006The resource loader cache doesn't have loaded MUI entry.
STATUS_RESOURCE_ENUM_USER_STOP0xC00B0007User stopped resource enumeration.
STATUS_FLT_NO_HANDLER_DEFINED0xC01C0001A handler was not defined by the filter for this operation.
STATUS_FLT_DISALLOW_FAST_IO0xC01C0004Internal error code used by the filter manager to determine if a fastio operation should be forced down the IRP path. Mini-filters should never return this value.
STATUS_FLT_INVALID_NAME_REQUEST0xC01C0005An invalid name request was made. The name requested cannot be retrieved at this time.
STATUS_FLT_NOT_INITIALIZED0xC01C0007The Filter Manager was not initialized when a filter tried to register. Make sure that the Filter Manager is getting loaded as a driver.
STATUS_FLT_FILTER_NOT_READY0xC01C0008The filter is not ready for attachment to volumes because it has not finished initializing (FltStartFiltering has not been called).
STATUS_FLT_INTERNAL_ERROR0xC01C000AThe Filter Manager had an internal error from which it cannot recover, therefore the operation has been failed. This is usually the result of a filter returning an invalid value from a pre-operation callback.
STATUS_FLT_DELETING_OBJECT0xC01C000BThe object specified for this action is in the process of being deleted, therefore the action requested cannot be completed at this time.
STATUS_FLT_DUPLICATE_ENTRY0xC01C000DA duplicate handler definition has been provided for an operation.
STATUS_FLT_CBDQ_DISABLED0xC01C000EThe callback data queue has been disabled.
STATUS_FLT_DO_NOT_ATTACH0xC01C000FDo not attach the filter to the volume at this time.
STATUS_FLT_DO_NOT_DETACH0xC01C0010Do not detach the filter from the volume at this time.
STATUS_FLT_FILTER_NOT_FOUND0xC01C0013The system could not find the filter specified.
STATUS_FLT_VOLUME_NOT_FOUND0xC01C0014The system could not find the volume specified.
STATUS_FLT_INSTANCE_NOT_FOUND0xC01C0015The system could not find the instance specified.
STATUS_FLT_NAME_CACHE_MISS0xC01C0018The name requested was not found in Filter Manager's name cache and could not be retrieved from the file system.
STATUS_FLT_NO_DEVICE_OBJECT0xC01C0019The requested device object does not exist for the given volume.
STATUS_FLT_ALREADY_ENLISTED0xC01C001BThe specified Transaction Context is already enlisted in a transaction
STATUS_FLT_NO_WAITER_FOR_REPLY0xC01C0020No waiter is present for the filter's reply to this message.
STATUS_FLT_REGISTRATION_BUSY0xC01C0023The filesystem database resource is in use. Registration cannot complete at this time.
STATUS_SXS_SECTION_NOT_FOUND0xC0150001The requested section is not present in the activation context.
STATUS_SXS_CANT_GEN_ACTCTX0xC0150002Windows was not able to process the application binding information. Please refer to your System Event Log for further information.
STATUS_SXS_ASSEMBLY_NOT_FOUND0xC0150004The referenced assembly is not installed on your system.
STATUS_SXS_MANIFEST_PARSE_ERROR0xC0150006The manifest file contains one or more syntax errors.
STATUS_SXS_KEY_NOT_FOUND0xC0150008The requested lookup key was not found in any active activation context.
STATUS_SXS_VERSION_CONFLICT0xC0150009A component version required by the application conflicts with another component version already active.
STATUS_SXS_WRONG_SECTION_TYPE0xC015000AThe type requested activation context section does not match the query API used.
STATUS_SXS_ASSEMBLY_MISSING0xC015000CThe referenced assembly could not be found.
STATUS_SXS_EARLY_DEACTIVATION0xC015000FThe activation context being deactivated is not the most recently activated one.
STATUS_SXS_INVALID_DEACTIVATION0xC0150010The activation context being deactivated is not active for the current thread of execution.
STATUS_SXS_CORRUPTION0xC0150015The application isolation metadata for this process or thread has become corrupt.
STATUS_SXS_IDENTITY_PARSE_ERROR0xC0150019The identity string is malformed. This may be due to a trailing comma, more than two unnamed attributes, missing attribute name or missing attribute value.
STATUS_SXS_FILE_HASH_MISMATCH0xC015001BA component's file does not match the verification information present in the component manifest.
STATUS_SXS_IDENTITIES_DIFFERENT0xC015001DThe component identities are different.
STATUS_XML_ENCODING_MISMATCH0xC0150021The character encoding in the XML declaration did not match the encoding used in the document.
STATUS_SXS_MANIFEST_TOO_BIG0xC0150022The size of the manifest exceeds the maximum allowed.
STATUS_GENERIC_COMMAND_FAILED0xC0150026A generic command executable returned a result that indicates failure.
STATUS_SXS_FILE_HASH_MISSING0xC0150027A component is missing file verification information in its manifest.
STATUS_CLUSTER_INVALID_NODE0xC0130001The cluster node is not valid.
STATUS_CLUSTER_NODE_EXISTS0xC0130002The cluster node already exists.
STATUS_CLUSTER_JOIN_IN_PROGRESS0xC0130003A node is in the process of joining the cluster.
STATUS_CLUSTER_NODE_NOT_FOUND0xC0130004The cluster node was not found.
STATUS_CLUSTER_NETWORK_EXISTS0xC0130006The cluster network already exists.
STATUS_CLUSTER_INVALID_REQUEST0xC013000AThe cluster request is not valid for this object.
STATUS_CLUSTER_NODE_DOWN0xC013000CThe cluster node is down.
STATUS_CLUSTER_NODE_UNREACHABLE0xC013000DThe cluster node is not reachable.
STATUS_CLUSTER_NODE_NOT_MEMBER0xC013000EThe cluster node is not a member of the cluster.
STATUS_CLUSTER_INVALID_NETWORK0xC0130010The cluster network is not valid.
STATUS_CLUSTER_NO_NET_ADAPTERS0xC0130011No network adapters are available.
STATUS_CLUSTER_NODE_UP0xC0130012The cluster node is up.
STATUS_CLUSTER_NODE_PAUSED0xC0130013The cluster node is paused.
STATUS_CLUSTER_NODE_NOT_PAUSED0xC0130014The cluster node is not paused.
STATUS_CLUSTER_POISONED0xC0130017The cluster node has been poisoned.
STATUS_CLUSTER_NON_CSV_PATH0xC0130018The path does not belong to a cluster shared volume.
STATUS_CLUSTER_CSV_REDIRECTED0xC0130022The operation has failed. CSVFS does not allow block i/o in redirected mode.
STATUS_TRANSACTIONAL_CONFLICT0xC0190001The function attempted to use a name that is reserved for use by another transaction.
STATUS_INVALID_TRANSACTION0xC0190002The transaction handle associated with this operation is not valid.
STATUS_TRANSACTION_NOT_ACTIVE0xC0190003The requested operation was made in the context of a transaction that is no longer active.
STATUS_TM_INITIALIZATION_FAILED0xC0190004The Transaction Manager was unable to be successfully initialized. Transacted operations are not supported.
STATUS_RM_NOT_ACTIVE0xC0190005Transaction support within the specified resource manager is not started or was shut down due to an error.
STATUS_RM_METADATA_CORRUPT0xC0190006The metadata of the RM has been corrupted. The RM will not function.
STATUS_TRANSACTION_NOT_JOINED0xC0190007The resource manager has attempted to prepare a transaction that it has not successfully joined.
STATUS_DIRECTORY_NOT_RM0xC0190008The specified directory does not contain a file system resource manager.
STATUS_COULD_NOT_RESIZE_LOG0x80190009The log could not be set to the requested size.
STATUS_LOG_RESIZE_INVALID_SIZE0xC019000BThe requested log size for the file system resource manager is invalid.
STATUS_CRM_PROTOCOL_NOT_FOUND0xC0190011The requested propagation protocol was not registered as a CRM.
STATUS_LOG_GROWTH_FAILED0xC0190019An attempt to create space in the transactional resource manager's log failed. The failure status has been recorded in the event log.
STATUS_OBJECT_NO_LONGER_EXISTS0xC0190021The object (file, stream, link) corresponding to the handle has been deleted by a transaction savepoint rollback.
STATUS_HANDLE_NO_LONGER_VALID0xC0190028The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint.
STATUS_NO_TXF_METADATA0x80190029There is no transaction metadata on the file.
STATUS_LOG_CORRUPTION_DETECTED0xC0190030The log data is corrupt.
STATUS_RM_DISCONNECTED0xC0190032The transaction outcome is unavailable because the resource manager responsible for it has disconnected.
STATUS_ENLISTMENT_NOT_SUPERIOR0xC0190033The request was rejected because the enlistment in question is not a superior enlistment.
STATUS_RECOVERY_NOT_NEEDED0x40190034The transactional resource manager is already consistent. Recovery is not needed.
STATUS_RM_ALREADY_STARTED0x40190035The transactional resource manager has already been started.
STATUS_CANT_CROSS_RM_BOUNDARY0xC0190038The operation would involve a single file with two transactional resource managers and is therefore not allowed.
STATUS_TXF_DIR_NOT_EMPTY0xC0190039The $Txf directory must be empty for this operation to succeed.
STATUS_TM_VOLATILE0xC019003BThe operation could not be completed because the transaction manager does not have a log.
STATUS_ROLLBACK_TIMER_EXPIRED0xC019003CA rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution.
STATUS_TXF_ATTRIBUTE_CORRUPT0xC019003DThe transactional metadata attribute on the file or directory hs is corrupt and unreadable.
STATUS_TRANSACTIONS_NOT_FROZEN0xC0190045The request to thaw frozen transactions was ignored because transactions had not previously been frozen.
STATUS_NOT_SNAPSHOT_VOLUME0xC0190047The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot.
STATUS_TM_IDENTITY_MISMATCH0xC019004AThe call to create a TransactionManager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument.
STATUS_FLOATED_SECTION0xC019004BI/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data.
STATUS_TRANSACTION_NOT_FOUND0xC019004EThe specified Transaction was unable to be opened, because it was not found.
STATUS_ENLISTMENT_NOT_FOUND0xC0190050The specified Enlistment was unable to be opened, because it was not found.
STATUS_TRANSACTION_NOT_ROOT0xC0190054The call to create a superior Enlistment on this Transaction object could not be completed, because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only the root of the Transaction can be enlisted on as a superior.
STATUS_TRANSACTION_NO_SUPERIOR0xC019005FThe transaction does not have a superior enlistment.
STATUS_EXPIRED_HANDLE0xC0190060The handle is no longer properly associated with its transaction. It may have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and open a new one.
STATUS_TRANSACTION_NOT_ENLISTED0xC0190061The specified operation could not be performed because the resource manager is not enlisted in the transaction.
STATUS_LOG_SECTOR_INVALID0xC01A0001Log service found an invalid log sector.
STATUS_LOG_SECTOR_REMAPPED0xC01A0003Log service encountered a remapped log sector.
STATUS_LOG_BLOCK_INCOMPLETE0xC01A0004Log service encountered a partial or incomplete log block.
STATUS_LOG_INVALID_RANGE0xC01A0005Log service encountered an attempt access data outside the active log range.
STATUS_LOG_BLOCKS_EXHAUSTED0xC01A0006Log service user log marshalling buffers are exhausted.
STATUS_LOG_READ_CONTEXT_INVALID0xC01A0007Log service encountered an attempt read from a marshalling area with an invalid read context.
STATUS_LOG_RESTART_INVALID0xC01A0008Log service encountered an invalid log restart area.
STATUS_LOG_BLOCK_VERSION0xC01A0009Log service encountered an invalid log block version.
STATUS_LOG_BLOCK_INVALID0xC01A000ALog service encountered an invalid log block.
STATUS_LOG_READ_MODE_INVALID0xC01A000BLog service encountered an attempt to read the log with an invalid read mode.
STATUS_LOG_NO_RESTART0x401A000CLog service encountered a log stream with no restart area.
STATUS_LOG_METADATA_CORRUPT0xC01A000DLog service encountered a corrupted metadata file.
STATUS_LOG_METADATA_INVALID0xC01A000ELog service encountered a metadata file that could not be created by the log file system.
STATUS_LOG_RESERVATION_INVALID0xC01A0010Log service encountered an attempt to erroneously allocate or dispose reservation space.
STATUS_LOG_CANT_DELETE0xC01A0011Log service cannot delete log file or file system container.
STATUS_LOG_START_OF_LOG0xC01A0013Log service has attempted to read or write backwards past the start of the log.
STATUS_LOG_POLICY_NOT_INSTALLED0xC01A0015Log policy in question was not installed at the time of the request.
STATUS_LOG_POLICY_INVALID0xC01A0016The installed set of policies on the log is invalid.
STATUS_LOG_POLICY_CONFLICT0xC01A0017A policy on the log in question prevented the operation from completing.
STATUS_LOG_PINNED_ARCHIVE_TAIL0xC01A0018Log space cannot be reclaimed because the log is pinned by the archive tail.
STATUS_LOG_RECORD_NONEXISTENT0xC01A0019Log record is not a record in the log file.
STATUS_LOG_TAIL_INVALID0xC01A001CA new or existing archive tail or base of the active log is invalid.
STATUS_LOG_FULL0xC01A001DLog space is exhausted.
STATUS_LOG_MULTIPLEXED0xC01A001ELog is multiplexed, no direct writes to the physical log is allowed.
STATUS_LOG_DEDICATED0xC01A001FThe operation failed because the log is a dedicated log.
STATUS_LOG_ARCHIVE_IN_PROGRESS0xC01A0021Log archival is in progress.
STATUS_LOG_EPHEMERAL0xC01A0022The operation requires a non-ephemeral log, but the log is ephemeral.
STATUS_LOG_STATE_INVALID0xC01A002BLog service is not in the correct state to perform a requested action.
STATUS_LOG_PINNED0xC01A002CLog space cannot be reclaimed because the log is pinned.
STATUS_LOG_PINNED_RESERVATION0xC01A0030The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available.
STATUS_MONITOR_NO_DESCRIPTOR0xC01D0001Monitor descriptor could not be obtained.
STATUS_GRAPHICS_PRESENT_DENIED0xC01E0007Not able to present due to denial of desktop access
STATUS_GRAPHICS_DRIVER_MISMATCH0xC01E0009The kernel driver detected a version mismatch between it and the user mode driver.
STATUS_GRAPHICS_NO_VIDEO_MEMORY0xC01E0100Not enough video memory available to complete the operation.
STATUS_GRAPHICS_ALLOCATION_BUSY0xC01E0102The allocation is currently busy.
STATUS_GRAPHICS_TRY_AGAIN_LATER0xC01E0104A problem couldn't be solved due to some currently existing condition. The problem should be tried again later.
STATUS_GRAPHICS_TRY_AGAIN_NOW0xC01E0105A problem couldn't be solved due to some currently existing condition. The problem should be tried again immediately.
STATUS_GRAPHICS_INVALID_VIDPN0xC01E0303Specified VidPN handle is invalid.
STATUS_GRAPHICS_MODE_NOT_PINNED0x401E0307No mode is pinned on the specified VidPN source/target.
STATUS_GRAPHICS_STALE_MODESET0xC01E0320Specified mode set is stale. Please reacquire the new mode set.
STATUS_GRAPHICS_NO_VIDPNMGR0xC01E0335Display adapter in question does not have an associated VidPN manager.
STATUS_GRAPHICS_NO_ACTIVE_VIDPN0xC01E0336VidPN manager of the display adapter in question does not have an active VidPN.
STATUS_GRAPHICS_INVALID_STRIDE0xC01E033CSpecified stride is invalid.
STATUS_GRAPHICS_START_DEFERRED0x401E043AStarting the adapter has been deferred temporarily.
STATUS_GRAPHICS_PVP_HFS_FAILED0xC01E0511The function failed because the display adapter's Hardware Functionality Scan failed to validate the graphics hardware.
STATUS_GRAPHICS_OPM_INVALID_SRM0xC01E0512The HDCP System Renewability Message passed to this function did not comply with section 5 of the HDCP 1.1 specification.
STATUS_GRAPHICS_INVALID_POINTER0xC01E05E4The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is NULL, it points to an invalid address, it points to a kernel mode address or it is not correctly aligned.
STATUS_GRAPHICS_INTERNAL_ERROR0xC01E05E7An internal error caused an operation to fail.
STATUS_FVE_LOCKED_VOLUME0xC0210000This volume is locked by BitLocker Drive Encryption.
STATUS_FVE_NOT_ENCRYPTED0xC0210001The volume is not encrypted, no key is available.
STATUS_FVE_BAD_INFORMATION0xC0210002The control block for the encrypted volume is not valid.
STATUS_FVE_TOO_SMALL0xC0210003The volume cannot be encrypted because it does not have enough free space.
STATUS_FVE_FAILED_WRONG_FS0xC0210004The volume cannot be encrypted because the file system is not supported.
STATUS_FVE_BAD_PARTITION_SIZE0xC0210005The file system size is larger than the partition size in the partition table.
STATUS_FVE_FS_NOT_EXTENDED0xC0210006The file system does not extend to the end of the volume.
STATUS_FVE_FS_MOUNTED0xC0210007This operation cannot be performed while a file system is mounted on the volume.
STATUS_FVE_NO_LICENSE0xC0210008BitLocker Drive Encryption is not included with this version of Windows.
STATUS_FVE_ACTION_NOT_ALLOWED0xC0210009Requested action not allowed in the current volume state.
STATUS_FVE_BAD_DATA0xC021000AData supplied is malformed.
STATUS_FVE_VOLUME_NOT_BOUND0xC021000BThe volume is not bound to the system.
STATUS_FVE_NOT_DATA_VOLUME0xC021000CThat volume is not a data volume.
STATUS_FVE_CONV_READ_ERROR0xC021000DA read operation failed while converting the volume.
STATUS_FVE_CONV_WRITE_ERROR0xC021000EA write operation failed while converting the volume.
STATUS_FVE_OVERLAPPED_UPDATE0xC021000FThe control block for the encrypted volume was updated by another thread. Try again.
STATUS_FVE_FAILED_SECTOR_SIZE0xC0210010The encryption algorithm does not support the sector size of that volume.
STATUS_FVE_NOT_OS_VOLUME0xC0210012That volume is not the OS volume.
STATUS_FVE_KEYFILE_NOT_FOUND0xC0210013The BitLocker startup key or recovery password could not be read from external media.
STATUS_FVE_KEYFILE_INVALID0xC0210014The BitLocker startup key or recovery password file is corrupt or invalid.
STATUS_FVE_KEYFILE_NO_VMK0xC0210015The BitLocker encryption key could not be obtained from the startup key or recovery password.
STATUS_FVE_TPM_DISABLED0xC0210016The Trusted Platform Module (TPM) is disabled.
STATUS_FVE_TPM_INVALID_PCR0xC0210018The system boot information changed or the Trusted Platform Module (TPM) locked out access to BitLocker encryption keys until the computer is restarted.
STATUS_FVE_TPM_NO_VMK0xC0210019The BitLocker encryption key could not be obtained from the Trusted Platform Module (TPM).
STATUS_FVE_PIN_INVALID0xC021001AThe BitLocker encryption key could not be obtained from the Trusted Platform Module (TPM) and PIN.
STATUS_FVE_AUTH_INVALID_CONFIG0xC021001CThe Boot Configuration Data (BCD) settings are not supported or have changed since BitLocker was enabled.
STATUS_FVE_DEBUGGER_ENABLED0xC021001DBoot debugging is enabled. Run bcdedit to turn it off.
STATUS_FVE_DRY_RUN_FAILED0xC021001EThe BitLocker encryption key could not be obtained.
STATUS_FVE_BAD_METADATA_POINTER0xC021001FThe metadata disk region pointer is incorrect.
STATUS_FVE_OLD_METADATA_COPY0xC0210020The backup copy of the metadata is out of date.
STATUS_FVE_REBOOT_REQUIRED0xC0210021No action was taken as a system reboot is required.
STATUS_FVE_RAW_ACCESS0xC0210022No action was taken as BitLocker Drive Encryption is in RAW access mode.
STATUS_FVE_RAW_BLOCKED0xC0210023BitLocker Drive Encryption cannot enter raw access mode for this volume.
STATUS_FVE_MOR_FAILED0xC0210025The system firmware failed to enable clearing of system memory on reboot.
STATUS_FVE_NO_FEATURE_LICENSE0xC0210026This feature of BitLocker Drive Encryption is not included with this version of Windows.
STATUS_FVE_CONV_RECOVERY_FAILED0xC0210028Bitlocker Drive Encryption failed to recover from aborted conversion. This could be due to either all conversion logs being corrupted or the media being write-protected.
STATUS_FVE_INVALID_DATUM_TYPE0xC021002AThe management information stored on the drive contained an unknown type. If you are using an old version of Windows, try accessing the drive from the latest version.
STATUS_FVE_VOLUME_TOO_SMALL0xC0210030The drive is too small to be protected using BitLocker Drive Encryption.
STATUS_FVE_ENH_PIN_INVALID0xC0210031The BitLocker encryption key could not be obtained from the Trusted Platform Module (TPM) and enhanced PIN. Try using a PIN containing only numerals.
STATUS_FVE_SECUREBOOT_DISABLED0xC0210039Secure Boot has been disabled. Either Secure Boot must be re-enabled, or BitLocker must be suspended for Windows to start normally.
STATUS_FVE_DEVICE_LOCKEDOUT0xC021003BDevice Lock has been triggered due to too many incorrect password attempts.
STATUS_FWP_CALLOUT_NOT_FOUND0xC0220001The callout does not exist.
STATUS_FWP_CONDITION_NOT_FOUND0xC0220002The filter condition does not exist.
STATUS_FWP_FILTER_NOT_FOUND0xC0220003The filter does not exist.
STATUS_FWP_LAYER_NOT_FOUND0xC0220004The layer does not exist.
STATUS_FWP_PROVIDER_NOT_FOUND0xC0220005The provider does not exist.
STATUS_FWP_SUBLAYER_NOT_FOUND0xC0220007The sublayer does not exist.
STATUS_FWP_NOT_FOUND0xC0220008The object does not exist.
STATUS_FWP_ALREADY_EXISTS0xC0220009An object with that GUID or LUID already exists.
STATUS_FWP_IN_USE0xC022000AThe object is referenced by other objects so cannot be deleted.
STATUS_FWP_WRONG_SESSION0xC022000CThe call was made from the wrong session so cannot be completed.
STATUS_FWP_NO_TXN_IN_PROGRESS0xC022000DThe call must be made from within an explicit transaction.
STATUS_FWP_TXN_IN_PROGRESS0xC022000EThe call is not allowed from within an explicit transaction.
STATUS_FWP_TXN_ABORTED0xC022000FThe explicit transaction has been forcibly cancelled.
STATUS_FWP_SESSION_ABORTED0xC0220010The session has been cancelled.
STATUS_FWP_INCOMPATIBLE_TXN0xC0220011The call is not allowed from within a read-only transaction.
STATUS_FWP_TIMEOUT0xC0220012The call timed out while waiting to acquire the transaction lock.
STATUS_FWP_NET_EVENTS_DISABLED0xC0220013Collection of network diagnostic events is disabled.
STATUS_FWP_INCOMPATIBLE_LAYER0xC0220014The operation is not supported by the specified layer.
STATUS_FWP_KM_CLIENTS_ONLY0xC0220015The call is allowed for kernel-mode callers only.
STATUS_FWP_LIFETIME_MISMATCH0xC0220016The call tried to associate two objects with incompatible lifetimes.
STATUS_FWP_BUILTIN_OBJECT0xC0220017The object is built in so cannot be deleted.
STATUS_FWP_TOO_MANY_CALLOUTS0xC0220018The maximum number of callouts has been reached.
STATUS_FWP_NOTIFICATION_DROPPED0xC0220019A notification could not be delivered because a message queue is at its maximum capacity.
STATUS_FWP_TRAFFIC_MISMATCH0xC022001AThe traffic parameters do not match those for the security association context.
STATUS_FWP_NULL_POINTER0xC022001CA required pointer is null.
STATUS_FWP_INVALID_ENUMERATOR0xC022001DAn enumerator is not valid.
STATUS_FWP_INVALID_FLAGS0xC022001EThe flags field contains an invalid value.
STATUS_FWP_INVALID_NET_MASK0xC022001FA network mask is not valid.
STATUS_FWP_INVALID_RANGE0xC0220020An FWP_RANGE is not valid.
STATUS_FWP_INVALID_INTERVAL0xC0220021The time interval is not valid.
STATUS_FWP_ZERO_LENGTH_ARRAY0xC0220022An array that must contain at least one element is zero length.
STATUS_FWP_NULL_DISPLAY_NAME0xC0220023The displayData.name field cannot be null.
STATUS_FWP_INVALID_ACTION_TYPE0xC0220024The action type is not one of the allowed action types for a filter.
STATUS_FWP_INVALID_WEIGHT0xC0220025The filter weight is not valid.
STATUS_FWP_MATCH_TYPE_MISMATCH0xC0220026A filter condition contains a match type that is not compatible with the operands.
STATUS_FWP_TYPE_MISMATCH0xC0220027An FWP_VALUE or FWPM_CONDITION_VALUE is of the wrong type.
STATUS_FWP_OUT_OF_BOUNDS0xC0220028An integer value is outside the allowed range.
STATUS_FWP_RESERVED0xC0220029A reserved field is non-zero.
STATUS_FWP_DUPLICATE_CONDITION0xC022002AA filter cannot contain multiple conditions operating on a single field.
STATUS_FWP_DUPLICATE_KEYMOD0xC022002BA policy cannot contain the same keying module more than once.
STATUS_FWP_EM_NOT_SUPPORTED0xC0220032An IKE policy cannot contain an Extended Mode policy.
STATUS_FWP_NEVER_MATCH0xC0220033The enumeration template or subscription will never match any objects.
STATUS_FWP_INVALID_PARAMETER0xC0220035The parameter is incorrect.
STATUS_FWP_TOO_MANY_SUBLAYERS0xC0220036The maximum number of sublayers has been reached.
STATUS_FWP_L2_DRIVER_NOT_READY0xC022003EThe WFP MAC Layers are not ready.
STATUS_FWP_CONNECTIONS_DISABLED0xC0220041The BFE IPsec Connection Tracking is disabled.
STATUS_FWP_INVALID_DNS_NAME0xC0220042The DNS name is invalid.
STATUS_FWP_STILL_ON0xC0220043The engine option is still enabled due to other configuration settings.
STATUS_FWP_IKEEXT_NOT_RUNNING0xC0220044The IKEEXT service is not running. This service only runs when there is IPsec policy applied to the machine.
STATUS_FWP_TCPIP_NOT_READY0xC0220100The TCP/IP stack is not ready.
STATUS_FWP_INJECT_HANDLE_STALE0xC0220102The injection handle is stale.
STATUS_FWP_CANNOT_PEND0xC0220103The classify cannot be pended.
STATUS_FWP_DROP_NOICMP0xC0220104The packet should be dropped, no ICMP should be sent.
STATUS_NDIS_CLOSING0xC0230002The binding to the network interface is being closed.
STATUS_NDIS_BAD_VERSION0xC0230004An invalid version was specified.
STATUS_NDIS_BAD_CHARACTERISTICS0xC0230005An invalid characteristics table was used.
STATUS_NDIS_ADAPTER_NOT_FOUND0xC0230006Failed to find the network interface or network interface is not ready.
STATUS_NDIS_OPEN_FAILED0xC0230007Failed to open the network interface.
STATUS_NDIS_DEVICE_FAILED0xC0230008Network interface has encountered an internal unrecoverable failure.
STATUS_NDIS_MULTICAST_FULL0xC0230009The multicast list on the network interface is full.
STATUS_NDIS_MULTICAST_EXISTS0xC023000AAn attempt was made to add a duplicate multicast address to the list.
STATUS_NDIS_MULTICAST_NOT_FOUND0xC023000BAt attempt was made to remove a multicast address that was never added.
STATUS_NDIS_REQUEST_ABORTED0xC023000CNetowork interface aborted the request.
STATUS_NDIS_RESET_IN_PROGRESS0xC023000DNetwork interface can not process the request because it is being reset.
STATUS_NDIS_NOT_SUPPORTED0xC02300BBNetword interface does not support this request.
STATUS_NDIS_INVALID_PACKET0xC023000FAn attempt was made to send an invalid packet on a network interface.
STATUS_NDIS_ADAPTER_NOT_READY0xC0230011Network interface is not ready to complete this operation.
STATUS_NDIS_INVALID_LENGTH0xC0230014The length of the buffer submitted for this operation is not valid.
STATUS_NDIS_INVALID_DATA0xC0230015The data used for this operation is not valid.
STATUS_NDIS_BUFFER_TOO_SHORT0xC0230016The length of buffer submitted for this operation is too small.
STATUS_NDIS_INVALID_OID0xC0230017Network interface does not support this OID (Object Identifier)
STATUS_NDIS_ADAPTER_REMOVED0xC0230018The network interface has been removed.
STATUS_NDIS_UNSUPPORTED_MEDIA0xC0230019Network interface does not support this media type.
STATUS_NDIS_FILE_NOT_FOUND0xC023001BAn attempt was made to map a file that can not be found.
STATUS_NDIS_ERROR_READING_FILE0xC023001CAn error occurred while NDIS tried to map the file.
STATUS_NDIS_ALREADY_MAPPED0xC023001DAn attempt was made to map a file that is alreay mapped.
STATUS_NDIS_RESOURCE_CONFLICT0xC023001EAn attempt to allocate a hardware resource failed because the resource is used by another component.
STATUS_NDIS_MEDIA_DISCONNECTED0xC023001FThe I/O operation failed because network media is disconnected or wireless access point is out of range.
STATUS_NDIS_INVALID_ADDRESS0xC0230022The network address used in the request is invalid.
STATUS_NDIS_PAUSED0xC023002AThe offload operation on the network interface has been paused.
STATUS_NDIS_INTERFACE_NOT_FOUND0xC023002BNetwork interface was not found.
STATUS_NDIS_INVALID_PORT0xC023002DThe specified port does not exist on this network interface.
STATUS_NDIS_INVALID_PORT_STATE0xC023002EThe current state of the specified port on this network interface does not support the requested operation.
STATUS_NDIS_LOW_POWER_STATE0xC023002FThe miniport adapter is in lower power state.
STATUS_NDIS_REINIT_REQUIRED0xC0230030This operation requires the miniport adapter to be reinitialized.
STATUS_NDIS_DOT11_MEDIA_IN_USE0xC0232001The wireless local area network interface is busy and can not perform the requested operation.
STATUS_NDIS_INDICATION_REQUIRED0x40230001The request will be completed later by NDIS status indication.
STATUS_NDIS_OFFLOAD_POLICY0xC023100FThe TCP connection is not offloadable because of a local policy setting.
STATUS_TPM_ERROR_MASK0xC0290000This is an error mask to convert TPM hardware errors to win errors.
STATUS_TPM_AUTHFAIL0xC0290001Authentication failed.
STATUS_TPM_BADINDEX0xC0290002The index to a PCR, DIR or other register is incorrect.
STATUS_TPM_BAD_PARAMETER0xC0290003One or more parameter is bad.
STATUS_TPM_AUDITFAILURE0xC0290004An operation completed successfully but the auditing of that operation failed.
STATUS_TPM_CLEAR_DISABLED0xC0290005The clear disable flag is set and all clear operations now require physical access.
STATUS_TPM_DEACTIVATED0xC0290006Activate the Trusted Platform Module (TPM).
STATUS_TPM_DISABLED0xC0290007Enable the Trusted Platform Module (TPM).
STATUS_TPM_DISABLED_CMD0xC0290008The target command has been disabled.
STATUS_TPM_FAIL0xC0290009The operation failed.
STATUS_TPM_BAD_ORDINAL0xC029000AThe ordinal was unknown or inconsistent.
STATUS_TPM_INSTALL_DISABLED0xC029000BThe ability to install an owner is disabled.
STATUS_TPM_INVALID_KEYHANDLE0xC029000CThe key handle cannot be interpreted.
STATUS_TPM_KEYNOTFOUND0xC029000DThe key handle points to an invalid key.
STATUS_TPM_INAPPROPRIATE_ENC0xC029000EUnacceptable encryption scheme.
STATUS_TPM_MIGRATEFAIL0xC029000FMigration authorization failed.
STATUS_TPM_INVALID_PCR_INFO0xC0290010PCR information could not be interpreted.
STATUS_TPM_NOSPACE0xC0290011No room to load key.
STATUS_TPM_NOSRK0xC0290012There is no Storage Root Key (SRK) set.
STATUS_TPM_NOTSEALED_BLOB0xC0290013An encrypted blob is invalid or was not created by this TPM.
STATUS_TPM_OWNER_SET0xC0290014The Trusted Platform Module (TPM) already has an owner.
STATUS_TPM_RESOURCES0xC0290015The TPM has insufficient internal resources to perform the requested action.
STATUS_TPM_SHORTRANDOM0xC0290016A random string was too short.
STATUS_TPM_SIZE0xC0290017The TPM does not have the space to perform the operation.
STATUS_TPM_WRONGPCRVAL0xC0290018The named PCR value does not match the current PCR value.
STATUS_TPM_BAD_PARAM_SIZE0xC0290019The paramSize argument to the command has the incorrect value .
STATUS_TPM_SHA_THREAD0xC029001AThere is no existing SHA-1 thread.
STATUS_TPM_SHA_ERROR0xC029001BThe calculation is unable to proceed because the existing SHA-1 thread has already encountered an error.
STATUS_TPM_FAILEDSELFTEST0xC029001CThe TPM hardware device reported a failure during its internal self test. Try restarting the computer to resolve the problem. If the problem continues, you might need to replace your TPM hardware or motherboard.
STATUS_TPM_AUTH2FAIL0xC029001DThe authorization for the second key in a 2 key function failed authorization.
STATUS_TPM_BADTAG0xC029001EThe tag value sent to for a command is invalid.
STATUS_TPM_IOERROR0xC029001FAn IO error occurred transmitting information to the TPM.
STATUS_TPM_ENCRYPT_ERROR0xC0290020The encryption process had a problem.
STATUS_TPM_DECRYPT_ERROR0xC0290021The decryption process did not complete.
STATUS_TPM_INVALID_AUTHHANDLE0xC0290022An invalid handle was used.
STATUS_TPM_NO_ENDORSEMENT0xC0290023The TPM does not have an Endorsement Key (EK) installed.
STATUS_TPM_INVALID_KEYUSAGE0xC0290024The usage of a key is not allowed.
STATUS_TPM_WRONG_ENTITYTYPE0xC0290025The submitted entity type is not allowed.
STATUS_TPM_INVALID_POSTINIT0xC0290026The command was received in the wrong sequence relative to TPM_Init and a subsequent TPM_Startup.
STATUS_TPM_INAPPROPRIATE_SIG0xC0290027Signed data cannot include additional DER information.
STATUS_TPM_BAD_KEY_PROPERTY0xC0290028The key properties in TPM_KEY_PARMs are not supported by this TPM.
STATUS_TPM_BAD_MIGRATION0xC0290029The migration properties of this key are incorrect.
STATUS_TPM_BAD_SCHEME0xC029002AThe signature or encryption scheme for this key is incorrect or not permitted in this situation.
STATUS_TPM_BAD_DATASIZE0xC029002BThe size of the data (or blob) parameter is bad or inconsistent with the referenced key.
STATUS_TPM_BAD_MODE0xC029002CA mode parameter is bad, such as capArea or subCapArea for TPM_GetCapability, phsicalPresence parameter for TPM_PhysicalPresence, or migrationType for TPM_CreateMigrationBlob.
STATUS_TPM_BAD_PRESENCE0xC029002DEither the physicalPresence or physicalPresenceLock bits have the wrong value.
STATUS_TPM_BAD_VERSION0xC029002EThe TPM cannot perform this version of the capability.
STATUS_TPM_NO_WRAP_TRANSPORT0xC029002FThe TPM does not allow for wrapped transport sessions.
STATUS_TPM_AUDITFAIL_SUCCESSFUL0xC0290031TPM audit construction failed and the underlying command was returning success.
STATUS_TPM_NOTRESETABLE0xC0290032Attempt to reset a PCR register that does not have the resettable attribute.
STATUS_TPM_NOTLOCAL0xC0290033Attempt to reset a PCR register that requires locality and locality modifier not part of command transport.
STATUS_TPM_BAD_TYPE0xC0290034Make identity blob not properly typed.
STATUS_TPM_INVALID_RESOURCE0xC0290035When saving context identified resource type does not match actual resource.
STATUS_TPM_NOTFIPS0xC0290036The TPM is attempting to execute a command only available when in FIPS mode.
STATUS_TPM_INVALID_FAMILY0xC0290037The command is attempting to use an invalid family ID.
STATUS_TPM_NO_NV_PERMISSION0xC0290038The permission to manipulate the NV storage is not available.
STATUS_TPM_REQUIRES_SIGN0xC0290039The operation requires a signed command.
STATUS_TPM_KEY_NOTSUPPORTED0xC029003AWrong operation to load an NV key.
STATUS_TPM_AUTH_CONFLICT0xC029003BNV_LoadKey blob requires both owner and blob authorization.
STATUS_TPM_AREA_LOCKED0xC029003CThe NV area is locked and not writtable.
STATUS_TPM_BAD_LOCALITY0xC029003DThe locality is incorrect for the attempted operation.
STATUS_TPM_READ_ONLY0xC029003EThe NV area is read only and can't be written to.
STATUS_TPM_PER_NOWRITE0xC029003FThere is no protection on the write to the NV area.
STATUS_TPM_FAMILYCOUNT0xC0290040The family count value does not match.
STATUS_TPM_WRITE_LOCKED0xC0290041The NV area has already been written to.
STATUS_TPM_BAD_ATTRIBUTES0xC0290042The NV area attributes conflict.
STATUS_TPM_INVALID_STRUCTURE0xC0290043The structure tag and version are invalid or inconsistent.
STATUS_TPM_KEY_OWNER_CONTROL0xC0290044The key is under control of the TPM Owner and can only be evicted by the TPM Owner.
STATUS_TPM_BAD_COUNTER0xC0290045The counter handle is incorrect.
STATUS_TPM_NOT_FULLWRITE0xC0290046The write is not a complete write of the area.
STATUS_TPM_CONTEXT_GAP0xC0290047The gap between saved context counts is too large.
STATUS_TPM_MAXNVWRITES0xC0290048The maximum number of NV writes without an owner has been exceeded.
STATUS_TPM_NOOPERATOR0xC0290049No operator AuthData value is set.
STATUS_TPM_RESOURCEMISSING0xC029004AThe resource pointed to by context is not loaded.
STATUS_TPM_DELEGATE_LOCK0xC029004BThe delegate administration is locked.
STATUS_TPM_DELEGATE_FAMILY0xC029004CAttempt to manage a family other then the delegated family.
STATUS_TPM_DELEGATE_ADMIN0xC029004DDelegation table management not enabled.
STATUS_TPM_OWNER_CONTROL0xC029004FAttempt to context save a owner evict controlled key.
STATUS_TPM_DAA_RESOURCES0xC0290050The DAA command has no resources availble to execute the command.
STATUS_TPM_DAA_INPUT_DATA00xC0290051The consistency check on DAA parameter inputData0 has failed.
STATUS_TPM_DAA_INPUT_DATA10xC0290052The consistency check on DAA parameter inputData1 has failed.
STATUS_TPM_DAA_ISSUER_SETTINGS0xC0290053The consistency check on DAA_issuerSettings has failed.
STATUS_TPM_DAA_TPM_SETTINGS0xC0290054The consistency check on DAA_tpmSpecific has failed.
STATUS_TPM_DAA_STAGE0xC0290055The atomic process indicated by the submitted DAA command is not the expected process.
STATUS_TPM_DAA_ISSUER_VALIDITY0xC0290056The issuer's validity check has detected an inconsistency.
STATUS_TPM_DAA_WRONG_W0xC0290057The consistency check on w has failed.
STATUS_TPM_BAD_HANDLE0xC0290058The handle is incorrect.
STATUS_TPM_BAD_DELEGATE0xC0290059Delegation is not correct.
STATUS_TPM_BADCONTEXT0xC029005AThe context blob is invalid.
STATUS_TPM_TOOMANYCONTEXTS0xC029005BToo many contexts held by the TPM.
STATUS_TPM_MA_TICKET_SIGNATURE0xC029005CMigration authority signature validation failure.
STATUS_TPM_MA_DESTINATION0xC029005DMigration destination not authenticated.
STATUS_TPM_MA_SOURCE0xC029005EMigration source incorrect.
STATUS_TPM_MA_AUTHORITY0xC029005FIncorrect migration authority.
STATUS_TPM_PERMANENTEK0xC0290061Attempt to revoke the EK and the EK is not revocable.
STATUS_TPM_BAD_SIGNATURE0xC0290062Bad signature of CMK ticket.
STATUS_TPM_NOCONTEXTSPACE0xC0290063There is no room in the context list for additional contexts.
STATUS_TPM_COMMAND_BLOCKED0xC0290400The command was blocked.
STATUS_TPM_INVALID_HANDLE0xC0290401The specified handle was not found.
STATUS_TPM_DUPLICATE_VHANDLE0xC0290402The TPM returned a duplicate handle and the command needs to be resubmitted.
STATUS_TPM_RETRY0xC0290800The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time.
STATUS_TPM_NEEDS_SELFTEST0xC0290801SelfTestFull has not been run.
STATUS_TPM_DOING_SELFTEST0xC0290802The TPM is currently executing a full selftest.
STATUS_TPM_DEFEND_LOCK_RUNNING0xC0290803The TPM is defending against dictionary attacks and is in a time-out period.
STATUS_TPM_COMMAND_CANCELED0xC0291001The command was cancelled.
STATUS_TPM_TOO_MANY_CONTEXTS0xC0291002A new TPM context could not be created because there are too many open contexts.
STATUS_TPM_NOT_FOUND0xC0291003TPM driver is not compatible with the version of TPM found on the system.
STATUS_TPM_ACCESS_DENIED0xC0291004The caller does not have the appropriate rights to perform the requested operation.
STATUS_TPM_INSUFFICIENT_BUFFER0xC0291005The caller does not have the appropriate rights to perform the requested operation.
STATUS_PCP_ERROR_MASK0xC0292000This is an error mask to convert Platform Crypto Provider errors to win errors.
STATUS_PCP_DEVICE_NOT_READY0xC0292001The Platform Crypto Device is currently not ready. It needs to be fully provisioned to be operational.
STATUS_PCP_INVALID_HANDLE0xC0292002The handle provided to the Platform Crypto Provider is invalid.
STATUS_PCP_INVALID_PARAMETER0xC0292003A parameter provided to the Platform Crypto Provider is invalid.
STATUS_PCP_FLAG_NOT_SUPPORTED0xC0292004A provided flag to the Platform Crypto Provider is not supported.
STATUS_PCP_NOT_SUPPORTED0xC0292005The requested operation is not supported by this Platform Crypto Provider.
STATUS_PCP_BUFFER_TOO_SMALL0xC0292006The buffer is too small to contain all data. No information has been written to the buffer.
STATUS_PCP_INTERNAL_ERROR0xC0292007An unexpected internal error has occurred in the Platform Crypto Provider.
STATUS_PCP_POLICY_NOT_FOUND0xC029200AThe referenced policy was not found.
STATUS_PCP_PROFILE_NOT_FOUND0xC029200BThe referenced profile was not found.
STATUS_PCP_VALIDATION_FAILED0xC029200CThe validation was not succesful.
STATUS_HV_INVALID_ALIGNMENT0xC0350004The hypervisor could not perform the operation because a parameter has an invalid alignment.
STATUS_HV_INVALID_PARAMETER0xC0350005The hypervisor could not perform the operation because an invalid parameter was specified.
STATUS_HV_ACCESS_DENIED0xC0350006Access to the specified object was denied.
STATUS_HV_OPERATION_DENIED0xC0350008The operation is not allowed in the current state.
STATUS_HV_UNKNOWN_PROPERTY0xC0350009The hypervisor does not recognize the specified partition property.
STATUS_HV_INSUFFICIENT_MEMORY0xC035000BThere is not enough memory in the hypervisor pool to complete the operation.
STATUS_HV_PARTITION_TOO_DEEP0xC035000CThe maximum partition depth has been exceeded for the partition hierarchy.
STATUS_HV_INVALID_PARTITION_ID0xC035000DA partition with the specified partition Id does not exist.
STATUS_HV_INVALID_VP_INDEX0xC035000EThe hypervisor could not perform the operation because the specified VP index is invalid.
STATUS_HV_INVALID_PORT_ID0xC0350011The hypervisor could not perform the operation because the specified port identifier is invalid.
STATUS_HV_INVALID_CONNECTION_ID0xC0350012The hypervisor could not perform the operation because the specified connection identifier is invalid.
STATUS_HV_INSUFFICIENT_BUFFERS0xC0350013Not enough buffers were supplied to send a message.
STATUS_HV_NOT_ACKNOWLEDGED0xC0350014The previous virtual interrupt has not been acknowledged.
STATUS_HV_ACKNOWLEDGED0xC0350016The previous virtual interrupt has already been acknowledged.
STATUS_HV_INVALID_SYNIC_STATE0xC0350018The hypervisor could not complete the operation because a required feature of the synthetic interrupt controller (SynIC) was disabled.
STATUS_HV_OBJECT_IN_USE0xC0350019The hypervisor could not perform the operation because the object or value was either already in use or being used for a purpose that would not permit completing the operation.
STATUS_HV_NO_DATA0xC035001BAn attempt to retrieve debugging data failed because none was available.
STATUS_HV_INACTIVE0xC035001CThe physical connection being used for debugging has not recorded any receive activity since the last operation.
STATUS_HV_NO_RESOURCES0xC035001DThere are not enough resources to complete the operation.
STATUS_HV_FEATURE_UNAVAILABLE0xC035001EA hypervisor feature is not available to the user.
STATUS_HV_INVALID_LP_INDEX0xC0350041The hypervisor could not perform the operation because the specified LP index is invalid.
STATUS_HV_NOT_PRESENT0xC0351000No hypervisor is present on this system.
STATUS_VID_DUPLICATE_HANDLER0xC0370001The handler for the virtualization infrastructure driver is already registered. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_TOO_MANY_HANDLERS0xC0370002The number of registered handlers for the virtualization infrastructure driver exceeded the maximum. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_QUEUE_FULL0xC0370003The message queue for the virtualization infrastructure driver is full and cannot accept new messages. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_HANDLER_NOT_PRESENT0xC0370004No handler exists to handle the message for the virtualization infrastructure driver. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_INVALID_OBJECT_NAME0xC0370005The name of the partition or message queue for the virtualization infrastructure driver is invalid. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_MB_STILL_REFERENCED0xC037000DThe memory block for the virtualization infrastructure driver is still being used and cannot be destroyed.
STATUS_VID_PAGE_RANGE_OVERFLOW0xC0370013The request exceeded the memory block page limit for the virtualization infrastructure driver. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_INVALID_PPM_HANDLE0xC0370018The handle is not a valid parent partition mapping handle for the virtualization infrastructure driver.
STATUS_VID_MBPS_ARE_LOCKED0xC0370019Notifications cannot be created on the memory block because it is use.
STATUS_VID_MESSAGE_QUEUE_CLOSED0xC037001AThe message queue for the virtualization infrastructure driver has been closed. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_STOP_PENDING0xC037001CCannot stop the virtual processor immediately because of a pending intercept.
STATUS_VID_MMIO_RANGE_DESTROYED0xC0370021The memory mapped I/O for this page range no longer exists. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
STATUS_VID_SAVED_STATE_CORRUPT0xC0370027Cannot restore this virtual machine because the saved state data cannot be read. Delete the saved state data and then try to start the virtual machine.
STATUS_IPSEC_BAD_SPI0xC0360001The SPI in the packet does not match a valid IPsec SA.
STATUS_IPSEC_WRONG_SA0xC0360003Packet was received on an IPsec SA that does not match the packet characteristics.
STATUS_IPSEC_INVALID_PACKET0xC0360005IPsec header and/or trailer in the packet is invalid.
STATUS_IPSEC_CLEAR_TEXT_DROP0xC0360007IPsec dropped a clear text packet.
STATUS_IPSEC_AUTH_FIREWALL_DROP0xC0360008IPsec dropped an incoming ESP packet in authenticated firewall mode. This drop is benign.
STATUS_IPSEC_THROTTLE_DROP0xC0360009IPsec dropped a packet due to DoS throttling.
STATUS_IPSEC_DOSP_BLOCK0xC0368000IPsec DoS Protection matched an explicit block rule.
STATUS_IPSEC_DOSP_MAX_ENTRIES0xC0368004IPsec DoS Protection failed to create state because the maximum number of entries allowed by policy has been reached.
STATUS_VOLMGR_DATABASE_FULL0xC0380001The configuration database is full.
STATUS_VOLMGR_DISK_DUPLICATE0xC0380006The same disk was specified more than once in the migration list.
STATUS_VOLMGR_DISK_DYNAMIC0xC0380007The disk is already dynamic.
STATUS_VOLMGR_DISK_ID_INVALID0xC0380008The specified disk id is invalid. There are no disks with the specified disk id.
STATUS_VOLMGR_DISK_INVALID0xC0380009The specified disk is an invalid disk. Operation cannot complete on an invalid disk.
STATUS_VOLMGR_DISK_LAST_VOTER0xC038000AThe specified disk(s) cannot be removed since it is the last remaining voter.
STATUS_VOLMGR_DISK_MISSING0xC0380011The specified disk is missing. The operation cannot complete on a missing disk.
STATUS_VOLMGR_DISK_NOT_EMPTY0xC0380012The specified disk is not empty.
STATUS_VOLMGR_MEMBER_IN_SYNC0xC0380023The specified member is already in-sync with the other active members. It does not need to be regenerated.
STATUS_VOLMGR_MEMBER_MISSING0xC0380026The specified member is missing. It cannot be regenerated.
STATUS_VOLMGR_ALL_DISKS_FAILED0xC0380029All disks belonging to the pack failed.
STATUS_VOLMGR_NO_SUCH_USER0xC038002BThe specified notification user does not exist. Failed to unregister user for notifications.
STATUS_VOLMGR_PACK_DUPLICATE0xC038002FThe specified source and target packs are identical.
STATUS_VOLMGR_PACK_ID_INVALID0xC0380030The specified pack id is invalid. There are no packs with the specified pack id.
STATUS_VOLMGR_PACK_INVALID0xC0380031The specified pack is the invalid pack. The operation cannot complete with the invalid pack.
STATUS_VOLMGR_PACK_NAME_INVALID0xC0380032The specified pack name is invalid.
STATUS_VOLMGR_PACK_OFFLINE0xC0380033The specified pack is offline.
STATUS_VOLMGR_PACK_HAS_QUORUM0xC0380034The specified pack already has a quorum of healthy disks.
STATUS_VOLMGR_PLEX_IN_SYNC0xC0380038The specified plex is already in-sync with the other active plexes. It does not need to be regenerated.
STATUS_VOLMGR_PLEX_LAST_ACTIVE0xC038003BThe specified plex is the last active plex in the volume. The plex cannot be removed or else the volume will go offline.
STATUS_VOLMGR_PLEX_MISSING0xC038003CThe specified plex is missing.
STATUS_VOLMGR_PLEX_REGENERATING0xC038003DThe specified plex is currently regenerating.
STATUS_VOLMGR_PLEX_TYPE_INVALID0xC038003EThe specified plex type is invalid.
STATUS_VOLMGR_PLEX_NOT_RAID50xC038003FThe operation is only supported on RAID-5 plexes.
STATUS_VOLMGR_PLEX_NOT_SIMPLE0xC0380040The operation is only supported on simple plexes.
STATUS_VOLMGR_VOLUME_ID_INVALID0xC0380046The specified volume id is invalid. There are no volumes with the specified volume id.
STATUS_VOLMGR_VOLUME_OFFLINE0xC038004BThe specified volume is offline.
STATUS_VOLMGR_VOLUME_RETAINED0xC038004CThe specified volume already has a retain partition.
STATUS_VOLMGR_BAD_BOOT_DISK0xC038004FThe boot disk experienced failures.
STATUS_VOLMGR_NOT_PRIMARY_PACK0xC0380052The specified pack is not the primary pack.
STATUS_VOLMGR_VOLUME_MIRRORED0xC0380056The operation is not supported on mirrored volumes.
STATUS_BCD_TOO_MANY_ELEMENTS0xC0390002Entries enumerated have exceeded the allowed threshold.
STATUS_VHD_DRIVE_FOOTER_MISSING0xC03A0001The virtual hard disk is corrupted. The virtual hard disk drive footer is missing.
STATUS_VHD_DRIVE_FOOTER_CORRUPT0xC03A0003The virtual hard disk is corrupted. The virtual hard disk drive footer in the virtual hard disk is corrupted.
STATUS_VHD_FORMAT_UNKNOWN0xC03A0004The system does not recognize the file format of this virtual hard disk.
STATUS_VHD_INVALID_BLOCK_SIZE0xC03A000BThe system does not support this version of the virtual hard disk. The block size is invalid.
STATUS_VHD_BITMAP_MISMATCH0xC03A000CThe virtual hard disk is corrupted. The block bitmap does not match with the block data present in the virtual hard disk.
STATUS_VHD_PARENT_VHD_NOT_FOUND0xC03A000DThe chain of virtual hard disks is broken. The system cannot locate the parent virtual hard disk for the differencing disk.
STATUS_VHD_INVALID_SIZE0xC03A0012The size of the virtual hard disk is not valid.
STATUS_VHD_INVALID_FILE_SIZE0xC03A0013The file size of this virtual hard disk is not valid.
STATUS_VIRTUAL_DISK_LIMITATION0xC03A001AThe requested operation could not be completed due to a virtual disk system limitation. On NTFS, virtual hard disk files must be uncompressed and unencrypted. On ReFS, virtual hard disk files must not have the integrity bit set.
STATUS_VHD_INVALID_TYPE0xC03A001BThe requested operation cannot be performed on a virtual disk of this type.
STATUS_VHD_INVALID_STATE0xC03A001CThe requested operation cannot be performed on the virtual disk in its current state.
STATUS_VHD_METADATA_FULL0xC03A0028There is not enough space in the virtual disk file for the provided metadata item.
STATUS_QUERY_STORAGE_ERROR0x803A0001The virtualization storage subsystem has generated an error.
STATUS_DIS_NOT_PRESENT0xC03C0001The Derived Indexed Store is not present (or currently loaded) on this system.
STATUS_DIS_ATTRIBUTE_NOT_FOUND0xC03C0002The Attribute was not found in the store for a given object.
STATUS_DIS_PARTIAL_DATA0xC03C0004Partial data was successfully returned, some attributes need to be calculated from elsewhere.
STATUS_RKF_KEY_NOT_FOUND0xC0400001The Resume Key Filter could not find the resume key supplied for the operation.
STATUS_RKF_DUPLICATE_KEY0xC0400002The Resume Key Filter found an existing resume key that matches the one supplied for the handle.
STATUS_RKF_BLOB_FULL0xC0400003The Resume Key Filter data blob attached to the handle is full. No more space is available.
STATUS_RKF_STORE_FULL0xC0400004The Resume Key Filter handle store is full. No more resume handles can be accepted.
STATUS_RKF_FILE_BLOCKED0xC0400005The Resume Key Filter failed the operation because the file is temporarily blocked pending the resume of existing handles on the file.
STATUS_RKF_ACTIVE_KEY0xC0400006The Resume Key Filter found an existing resume key that matches the one supplied on a handle that's active/open. The operation requires an inactive/closed handle.
STATUS_RDBSS_RESTART_OPERATION0xC0410001The operation must be restarted by RDBSS.
STATUS_RDBSS_CONTINUE_OPERATION0xC0410002The operation must continue processing.
STATUS_RDBSS_POST_OPERATION0xC0410003The operation must be posted to a thread to be retried at passive IRQL.
STATUS_BTH_ATT_INVALID_HANDLE0xC0420001The attribute handle given was not valid on this server.
STATUS_BTH_ATT_INVALID_PDU0xC0420004The attribute PDU was invalid.
STATUS_BTH_ATT_INVALID_OFFSET0xC0420007Offset specified was past the end of the attribute.
STATUS_BTH_ATT_UNLIKELY0xC042000EThe attribute request that was requested has encountered an error that was unlikely, and therefore could not be completed as requested.
STATUS_BTH_ATT_UNKNOWN_ERROR0xC0421000An error that lies in the reserved range has been received.
STATUS_SECUREBOOT_NOT_ENABLED0x80430006Secure Boot is not enabled on this machine.
STATUS_SECUREBOOT_FILE_REPLACED0xC0430007Secure Boot requires that certain files and drivers are not replaced by other files or drivers.
STATUS_SPACES_NOT_ENOUGH_DRIVES0xC0E7000BThere were not enough physical disks to complete the requested operation.

Technologies

Resources

  • What our customers say about us?

© 2011-2017 All Rights Reserved. Joya Systems. 4425 South Mopac Building II Suite 101 Austin, TX 78735 Tel: 800-DEV-KERNEL

Privacy Policy. Terms of use. Valid XHTML & CSS